1. Anchor
Channel Systems
2. HAC
Portfolio
3. HAC
Applications
5. Base material
6. Loading
HBC-T
For tension, perpendicular and longitudinal shear loads
Hilti Channel Bolts (HBC and HBC-T) are part of the cast-in
anchor channel system. HBC come in a variety of diameters,
grades, and corrosion protection. The T-bolt head shape works
with all four different channel HAC sizes (HAC-40, HAC-50,
HAC-60, and HAC-70) simplifying logistical management on
the jobsite. Moreover, because the size of the head of the bolt
does not get bigger as the anchor channel profile gets bigger,
optimizing the amount of steel used per bolt, brining economy of
scale.
7. Anchor Channel
Design Code
8. Reinforcing
Bar Anchorage
9. Special Anchor
Channel Design
10. Design
Software
Foam Filler
Environmentally freindly, low density polyethylene
foam filling. It prevents fresh concrete from entering
the channel cavity
Rivet
End cap
HBC-T
(HDG)
14. Design
Example
End caps help keep concrete slurry out of the
channels
Loctite-type Agent
Applied at the threads of the anchor to avoid
movement and unscrewing of the anchor
Textile Tape
Eases the removal of the foam by allowing the entire
foam length to be removed from the channel
Channel Profile
Temperature controlled form rolling
Hot-dip galvanized ≥ 55 μm (HAC-30 to HAC-(T)50)
Hot-dip galvanized ≥ 70 μm (HAC-60 to HAC-(T)70)
Smooth profile
Serrated profile
Steel grade
Anchor
Carbon steel rounded headed anchor, hot-dip
galvanized ≥ 45 μm
HBC-B
For tension, perpendicular and longitudinal shear loads
Steel grade
Hilti Cast-in Anchor Channel: HAC CRFoS U
HBC-C-N
For tension, perpendicular and longitudinal shear loads
Foam Filler
Environmentally freindly, low density polyethylene
foam filling. It prevents fresh concrete from entering
the channel cavity
Rivet
Carbon steel and hot dip galvanized ≥ 45 μm
End cap
End caps help keep concrete slurry out of the
channels
Eases the removal of the foam by allowing the entire
foam length to be removed from the channel
Channel Profile
Temperature controlled form rolling
Hot-dip galvanized ≥ 55 μm (HAC-50)
Hot-dip galvanized ≥ 70 μm (HAC-60 to HAC-70)
Smooth profile
Serated profile
Jam Nut
Loctite-type Agent Non-structural stainless steel nut
Applied at the threads of the reinforcing bar to avoid
movement and unscrewing of the reinforcing bar Threaded End Reinforcing Bar
Allows reinforcing bar to be mechanically connected
to channel profile
Zinc Rich Paint
Zinc rich paint is applies at the thread of the
reinforcing bar and adjacent surface, for up to 2" to
provide corrosion protection of connection
Reinforcing Bar
Reinforcement steel according to
DIN 488-1. Bst 500 B
fy = 72.50 ksi
28
Cast-In Anchor Channel Product Guide, Edition 1 • 02/2019
29
HBC-C-N
(HDG)
Textile Tape
HBC-C 50 R
(Stainless Steel)
13. Field Fixes
Hilti Cast-in Anchor Channel: HAC and HAC-T
HBC-C
HBC-C
(HDG)
12. Instructions
for Use
1.3 HAC COMPONENTS
Carbon steel and hot dip galvanized ≥ 45 μm
steel grade
Loads in 2D only (tension and perpendicular shear)
11. Best
Practices
1.2.4 H
ILTI CHANNEL BOLTS: HBC-C AND
HBC-T
4. Design
Introduction