1. Anchor
Channel Systems
2. HAC
Portfolio
3. HAC
Applications
4. Design
Introduction
5. Base material
6. Loading
7. Anchor Channel
Design Code
8. Reinforcing
Bar Anchorage
9. Special Anchor
Channel Design
10. Design
Software
11. Best
Practices
12. Instructions
for Use
13. Field Fixes
14. Design
Example
THE SERRATED HAC-T — THE BEST ANCHOR CHANNEL SYSTEM FOR
SEISMIC AND 3D LOADS
HAC EDGE (Patent pending) HAC-T
Provides up to 5.6X higher concrete breakout strength in shear than traditional anchor channels
PERFORMANCE
Rebar Edge Confinement Plate
(EDGE plate)
• High slip resistances at low installation torque.
• Rebar channels available on serrated.
Superior concrete edge performance in
small edge distances and thin concrete
members.
TAKE YOUR ANCHOR CHANNELS TO A NEW EDGE. ANCHOR
CHANNEL SYSTEM FOR SUPERIOR CONCRETE EDGE PERFORMANCE
RELIABILITY
• Optimal t-bolt/channel lip interlocking for consistent performance.
• Redundant system due to multiple teeth engagement between t-bolt
and channel lip’s serrations.
FEASIBILITY
Simplified Installation
• Innovative manufacturing process that brings serrations at minimal
extra cost.
• Price of HAC-T is similar to it’s equivalent HAC size with HBC-C-N.
Additional nail holes to easily
fix the anchor channel to the
formwork.
SAFETY
Safer and faster Installation
• Higher installation safety via lower installation torque.
• Lighter torque wrench, less muscle fatigue.
Product comes with the required edge
distance for more accurate and faster
installation.
SIMPLICITY
State-of-art design model based on ESR-3520
and principles of AC232 and ACI 318
HAC S EDGE (Patent pending)
19 out of 20 potential failure modes are
calculated in accordance with ESR-3520
• Higher slip resistances without continuous inspection requirements.
• One channel bolt size suitable for both channel sizes HAC-T50 and
HAC-T70.
Corner Solutions
Suitable for applications that require repositioning of the T-bolts and transferring of longitudinal forces.
Superior Steel
Performance
"S" bracket structurally
connected to HAC for increased
channel lip and anchor-channel
performance.
State-of-the-art design model for top of slab corners based on
principles of AC232. Design valid for HAC, HAC EDGE, and HAC
S EDGE
20
Cast-In Anchor Channel Product Guide, Edition 1 • 02/2019
21