FM25 FLUID MANAGEMENT SYSTEM
• Simple design and multiple configuration options accommodate
a variety of setups and make transport easy.
U.S.
METRIC
FLUID/MIXING SYSTEM
Centrifugal pumps
2
• 25-hp (18.7-kW) Kubota® diesel engine provides the power to
Suction port diameter
3 in
support even the largest Ditch Witch directional drilling systems.
Discharge port diameter
3 in
76 mm
Fluid pressure, max
50 psi
3.4 bar
• Choice of one or two hoppers, either a 500-gallon (1893-L) or
Pump discharge rate, max (each pump)
300 gpm
1100 l/min
1,000-gallon (3785-L) tank, and a fuel fill on both sides, allows
Flow rate to boring unit
0-200 gpm
0-750 l/min
1893/3785 L
®
76 mm
Drilling fluid tank capacity (nominal, each tank)
500/1,000 gal
Solids addition rate w/metering plate
30 lb/min
14 kg/m
• Optional accessories, including an anti-siphon tank fill and an
Solids addition rate w/out metering plate
75 lb/min
34 kg/m
umbrella kit, enhance the FM25’s versatility.
Mixing hopper capacity (each hopper)
1 ft3
28 L
Typical tank mixing time
7-10 min
flexible setup configurations on a trailer or truck.
POWER
U.S.
METRIC
Engine
Kubota® D1105
DIMENSIONS
Fuel
Diesel
MIXING SYSTEM W/TWO 500-GALLON TANKS
Cooling medium
Water
Length
175 in
4.45 m
Injection
Indirect
Width
92 in
2.34 m
Aspiration
Natural
Number of cylinders
3
Height
Tank assembly w/out fill pipe
68 in
1.73 m
Displacement
68.5 in3
1.12 L
Tank assembly w/fill pipe
75 in
1.91 m
Bore
3.07 in
78 mm
Weight, empty
2,350 lb
1070 kg
Stroke
3.09 in
78.4 mm
Weight, full of water
10,650 lb
4830 kg
Manufacturer's gross power rating
(per SAE J1995)
25 hp
18 kW
Rated speed
3,000 rpm
MIXING SYSTEM W/TWO 1,000-GALLON (NOMINAL) TANKS
Length
205 in
5.21 m
Width
96 in
2.44 m
Height
Tank assembly w/out fill pipe
72 in
1.83 m
Tank assembly w/fill pipe
80 in
2.03 m
Weight, empty
3,450 lb
1570 kg
Weight, full of water
19,850 lb
9000 kg
FLUID CAPACITIES
Fuel tank
9.2 gal
35 L
Engine lubrication oil, including filter
4.2 qt
4L
Specifications are general and subject to change without notice. If exact
measurements are required, equipment should be weighed and measured.
Due to selected options, delivered equipment may not necessarily match
that shown.