Pro Installer March 2017 - Issue 48 | Page 21

News
Read online at www. proinstaller. co. uk
MARCH 2017 | 21

News

GLASS LINE INVESTMENT

Home improvement and glazing specialist EYG is doubling production of insulated glass units with the support of Edgetech UK. quite likely they’ ll experience some mould or mildew at some point. If the condensation is leaving puddles of water on window sills or flooring, they should address the issue as soon as they can. Mould and damp is not just unsightly, but can pose serious problems to health such as respiratory issues and allergic reactions, so getting it sorted sooner rather than later is paramount.
Outside condensation does not cause problems with a property but may be frustrating, as external views are misted up.
Condensation solutions
For inside condensation, there is no quick fix. Instead, tackling it is an ongoing issue and will mean adapting lifestyles in some key areas. Opening windows when cooking and when in the bath or shower is helpful— all year round if possible. When householders first spot condensation, they should open the window( or a window in the same room) a small amount and wipe up any moisture which has already formed with a towel.
Installing a dehumidifier can also make a big difference, and it is worth researching the best size and power needed before purchasing one, as there are a wide range of options available.
Drying clothing inside the home is one of the worst causes of water vapour, so home-owners should aim to dry clothes outside or tumble-dry them where possible. Where this is not an option, ensure windows are open and try not to put out too many wet clothes at once. It’ s not a good idea to dry clothes in a room which does not get a lot of sunlight due to the direction it faces or because it is in shadow, as this can exacerbate issues with mould, so when indoors is your only option, aim to dry clothing in sunnier, well ventilated rooms. Outside condensation should clear on its own and should not stay for very long. However, the severity of it can vary depending on how much sun a home gets. If outside condensation is becoming a problem, local DIY shops are likely to stock a waterproofing spray which can be applied to the outside of the glass to ensure the condensation cannot‘ stick’ to the surface as easily. Check with a window installer to ensure this does not affect any warranty you may have.
Gap condensation can only be solved by having the unit replaced, which may be under warranty or covered in a home insurance policy. If not, homeowners don’ t have to worry about replacing the whole window or door as the glazed unit can be removed and a new one can be fitted into the same frame. Double glazed units should not fail like this but it does happen, either through general wear and tear or accidental damage.
Window and door best practice
Looking after windows and doors and ensuring that they are kept up to date where efficiency is concerned is important in many ways, and can also help to tackle condensation on a long-term basis. Very old doors and windows will not be as efficiently glazed as newer versions. The manufacture of glazing has come so far in recent years that people may be surprised at what a difference new double-glazing and efficient frames can make to comfort and energy bills.
Keeping windows and frames clean and free of debris is also important, as a buildup of grime could cause water to build up where it shouldn’ t due to blocked drainage holes. This in turn can accelerate the wear and tear on the unit, causing it to fail.
There is a huge on-line resource library with guides and tips on windows, doors, garages, home security and locks on the Evander website at http:// www. evander. com / help-advice /
Evander is the UK windows, doors, and emergency response glazing and locks provider. It is a subsidiary of VPS, the property management specialist.
www. vpsgroup. com
EYG has invested £ 500,000 in a new highspeed Forel insulated glass line at its Hull-based manufacturing facility. It can now produce a double glazed unit made with Super Spacer ® every 35 seconds. This has enabled the company to offer‘ A’ energy rated windows as standard on all double glazing installations.
John Waugh, retail sales director at EYG, said:“ Edgetech helped us every step of the way, from guidance on machinery solutions right through to the first Super Spacer units rolling off the line.
“ The team spent a lot of time with us ensuring we got up and running and producing our new improved windows without any issues.
Their support and training was invaluable to us as the machinery, and the process of setting the glass in place, was different to what we had done before.”

Where canopies are concerned... they’ ve got your needs covered!

SUPPLIERS OF CANOPIES TO THE TRADE AND CONSUMERS The range of both wall fixed and free standing mono-pitch canopies come in off the shelf sizes, and for customers who need an exact size, Birchwood Trading offer a bespoke made-to-measure canopy.
EASY TO INSTALL- Canopies come as a complete kit of parts with installation instructions. Frames are made from maintenance free powder coated aluminium and can be finished to any RAL colour you choose.
All glazing options are covered from tough, yet lightweight, multiwall and solid polycarbonate to glass.
Find out more about EYG at www. eygwindows. co. uk and more about Super Spacer and high-speed IGU production at www. edgetechig. co. uk
Please call 01925 826 314 or email enquiries @ birchwoodtrading. co. uk www. birchwoodtrading. co. uk