Powervamp Portable Power Packs from Alliance Electronics 2018 2018 | Page 2

TechnoBoost
FEATURES
● Built-in 3-stage 2.3 amp charger and side-mounted
IEC mains input socket.
● LED indicator lights, instead of digital voltmeters,
indicate when pack is on charge and battery
charge status.
● 2-metre lead and rubber 3-pin Nato plug
● Separate 2-metre colour-coded lead with 500 amp
cast brass and braided croc clips for connection to
vehicle batteries.
● Auto-selecting 110/220v AC internal charger
system
INCLUDED ACCESSORIES
Croc Lead Set
● 2m croc lead set using 25mm² cable and 500a
braided croc. clips
Mains Charger
● 3-pin detachable UK mains lead
Tough 12v / 24v jump-starter designed for frequent starting of commercial
vehicles. The 1224 HDD is intended for heavy or regular 24 volt starting
and 12 volt van starting. This unit is for fleet users, operating diesels
typically up to 15 litres.
OPTIONAL ACCESSORIES
Cowbell/Bus plug lead
● 2m lead using 50mm² cable fitted with heavy-duty
cowbell/bus plug.
Lead Light
SPECIFICATIONS TB1224HDD
Output voltage 12/24v
Cell Capacity
Peak Amps (Max short circuit current)
Output Amps (recommended continuous)
Re-charge time (standard charger) from 50% 33/33 amp/hrs
2600 amps
925 amps
5hrs
3-stage integral with cell
capacity light
5.4 amp 3-stage @ 14.9 v
110v/240v
On-board charger
Total charger output
AC Input Requirements
Auto-voltage Selection
Operating temperature range
Case/Chassis Construction
Height
290mm
Depth
130mm
Width
380mm
● High-powered lead light with extra long cable and
strong integral clamp. Light is suitable for all
products and is available in 12v and 24v.
Onboard Charge Kit (4 pin plug)
● Onboard Charge Kit (OBCK) plugs into automotive 12vdc
auxiliary power source to allow constant topping up of
jump pack whilst engine running
Universal Trolley
● Heavy duty trolley with extendable front and side
bars to accept majority of Powervamp Aviation and
Automotive products
-30C – +40C
Powder coated mild steel
Weight
27kg
www.portablepowerpacks.co.uk