Powervamp Portable Power Packs from Alliance Electronics 2018 2018 | Page 6

MR26
FEATURES
● Surge protection and reverse polarity warning
● Specially toughened shatterproof impact resistant
polymer case
● Top mounted charging/accessory socket – can be
charged from vehicle
● 2-metre detachable leads will reach all vehicle
batteries
● Top quality braided and insulated crocodile clips
● Integral 2.7 amp 3-stage switch mode fully
automatic charging system operates on 110v or
220v AC supply voltage
● Four LED battery status display
● LED integral mains charging status display
● Key switch isolator for safety and ease of use
High-powered 12v starter pack for frequent, everyday professional use.
Suitable for starting all sizes of petrol engines including 4×4. All 12v Diesel,
1.8–3.5 litres, depending on vehicle type
INCLUDED ACCESSORIES
Croc Lead Set
● 2m croc lead set using 25mm² cable and 500 amp
braided croc. clips.
UK Mains Lead
● 3-pin detachable UK mains lead
SPECIFICATIONS
Cell Capacity 33 amp/hr
Peak Amps (Max short circuit current)
Output Amps (recommended continuous)
CCA - 18°C 30 secs to 7.5 volts:
On-board charger
AC Input Requirements
Auto-voltage Selection 2400 amps
400 amps
370 amps
110–240v / 16A (Auto Selecting)
Height Depth Width Weight
350mm 160mm 210mm 13.8kg
Cars all petrol all diesel including 4x4s
Vans/pickups all petrol Diesel 1.8–3.5 depending on vehicle type
Petrol engines up to 7.0 litres+
Diesel engines 1.8–3.5 litres
OPTIONAL ACCESSORIES
Lead Light
● High-powered lead light with extra long cable and strong
integral clamp. Light is suitable for all products and is
available in 12v and 24v
Onboard Charge Kit (merit plug)
● Onboard Charge Kit (OBCK) plugs into automotive 12vdc
auxiliary power source to allow constant topping up of
jump pack whilst engine running
www.portablepowerpacks.co.uk