64
PRODUCTS
Stepping up the surface
Setaplano is Geberit’s new shower surface, which has a smooth feeling
and is easy to clean. The surface is easy to install as it has minimal
individual parts. Many of the individual components are pre-mounted at
the factory.
One of the advantages of the pre-mounted shower surface is that it
reduces the workload of the installer and also ensures maximum safety.
The blue installation frame is made of powder-coated steel. Installing the
feet requires them being clicked into place on the installation frame at
the designated points, then fixed to the unfinished floor.
The Setaplano shower surface includes a new, easy-to-clean trap that
comes in two different models: one with a 30mm depth of water seal and
a discharge capacity of more than 0.5 litres per second, and one with a
An installation
system
50mm depth of water seal and a discharge capacity of more than 0.65
litres per second.
FOR MORE INFORMATION, CONTACT +27 (0) 11 444 5070.
Decentralised water
heating
The decentralised DHW station
Flow 8000 from Bosch is ideal
for efficient water heating and
heat distribution in homes. The
devices can easily be connected
to the building’s own central
heat generation system or local
and district heating systems.
This makes it possible to use
renewable energy sources such
as solar and geothermal power.
Hansa’s new 3S installation system ensures that washbasin
mixers can be fitted more efficiently than ever before. All
the important components required for installation, such as
a locking plate, a seal, and a nut, are integrated into one
workpiece. This therefore eliminates the need to fiddle with
small parts.
Another advantage of the 3S installation system is that
installation time is significantly reduced. The combination of
stainless steel and high-strength fibreglass-reinforced plastic
makes the components both mechanically and chemically
resistant, and gives it a long service life — even when they
are under extreme stress loads.
FOR MORE INFORMATION,
CONTACT +27 (0) 11 315 6120.
October 2017 Volume 23 I Number 8
The decentralised DHW station
Flow 8000 supplies hygienic
domestic hot water by heating
the water as it flows through
the device. An electronic control
system ensures constant hot
water temperatures. Complete
insulation of the Flow 8000 minimises heat losses.
The Flow 8000 is available with two different output ratings for domestic
water heating: as a 35kW and a 50kW device. On the heating system side,
the Flow 8000 can be integrated into mixed and unmixed heating circuits. Its
integration is very simple because an electronic valve automatically controls
the hydraulic calibration.
FOR MORE INFORMATION, CONTACT +27 (0) 12 381 3552.
www.plumbingafrica.co.za