PRODUCTS
11
Venisio Slim Channel Wirquin
Wirquin’s Venisio Slim Channel is the most compact
shower trap in the market, ideal for renovation with walk-in
showers and an elegant mushroom style grid which offers a
professional long-lasting finish. The stainless steel grid can
be turned around and tiled within. The spacers included are
for adjusting height if needed to get the grid flush with tiles.
Other features include:
• Membrane trap: replaces the water trap, easily
accessible from the top for cleaning and removing hair
• Anti-odour function: as efficient as a water trap and has
a silicon membrane
• Ball joint feet to adjust height of trap and fix to floor
• Flow rate: 35ℓ/min under 20mm of water
• Height of channel (under floor) 50mm
• Adjustable height from 50 to 110mm
• Connection to drainage system 50mm to be glued or
push fit
• A wet-room system that eliminates the need for a
traditional shower enclosure and there for provides
easier access in special needs environments.
• Available in two lengths of 300mm and 500mm
The depth of the trap underneath provides for ease of
installing in floors that don’t provide a lot of space (eco
floors). The waterless trap allows the client with direct
access from the trap to remove hair or soap build up. The
adjustable feet get drilled into the floor to provide a much
sturdier trap and it can be adjusted up and down according
to the screed depth required. The 40mm outlet is for easy
connection, while a waterproof membrane is also included to
insure a 100% leak proof trap. PA
PumpWave series
PumpWave is a range of electronic pump controllers
ideally suited for domestic water supply in and around
the home. PumpWave offers complete automatic
management of most electric pumps. Both the
PumpWave Plus and PumpWave 2 eliminate frequent
small draw-off pump starts due to leaks and low-flow
pumping applications.
PumpWave Plus: PumpWave Plus is a compact solution
that combines a pump controller with an integrated 3ℓ
pressure tank. It is ideal for applications where space is
limited. It is easy to install as you simply connect it to the
pump and the system is ready to go.
PumpWave 2: For those looking for a customisable
system, look no further. The PumpWave 2 is a standalone
pump controller that can be installed in combination with
a range of inline and horizontal tanks. PA
The process is simple: the PumpWave device draws
water from the (integrated) pressure tank until the
adjustable start or cut-in pressure is achieved; the pump
is then switched on and allowed to run until there is no
longer any flow within the system. The PumpWave Series
assures a constant flow and provides guaranteed pump
dry protection.
January 2020 Volume 25 I Number 11
www.plumbingafrica.co.za