Pipe Shoe Technical Guide for North America Vol. 1 July 2022 | Page 57

Modular Pipe Shoes Technical Supplement

6.0 INSULATION BANDS 6.2 MP-A I-S

For adding galvanic separation and mild acoustic isolation to MP-PS pipe shoes .

MP-A I-S Applications

• Creating temperature separation between pipes and pipe clamps to reduce temperature transfer to sub-structure

• Creating surface separation between pipes and pipe clamps to prevent direct contact between different materials

MP-A I-S Advantages

• Galvanic separation — helps prevent direct contact between pipe clamp and pipe ( helping to avoid acoustic bridging )

• Adaptable — suitable for all MP-PS pipe shoes due to the clamping range of the pipe clamps ( no specific clamp diameter required )

Product Information

Material composition

Material composition details

Friction coefficient ( steel pipe vs . inlay )

Environmental conditions

Temperature resistance ( based on EN13480-3 )

Fire resistance ( Yes / No )

Silikon + self-adhesive layer + release liner

• Silikon — elastosil R 401 / 60 S

• Shore A 60 °± 5 °

• Density 71.79 lb / ft 3 ( 1150 kg / m 3 )

• Tensile strength 1.60 ksi ( 11 MPa )

• Static : min . 0.3

• Kinetic : min . 0.3

Outdoor , low to moderate pollution ( C3 )

4 ° F to 410 ° F ( -20 ° C to 210 ° C )

No