Modular Pipe Shoes Technical Supplement
4.0 FIXPOINT CONNECTOR 4.2 MT-FPS-FZL
Table 37 : MT-FPS-FZL Allowable Design Strength ( ASD ) Load Data per MSS SP-58 1 , 2 , 3 , 4
Configuration
1 Bracket
+/ -Fx lb ( kN )
1430 ( 6.36 )
+/ -Fy lb ( kN )
2310 / H center ( 12.28 / H center
)
-Fz lb ( kN )
700 ( 3.11 )
1 Tabulated directional values apply separately in each direction . A combination of loads must be considered separately , and an appropriate interaction equation defined by the design professional must be applied . 2 MSS SP-58 values are based off the safety factors provided in the MSS SP-58 . 3 Tabulated values as shown does not include or account for anchorage . Anchorage must be determined separately and may reduce the overall capacity from the tabulated values . 4 H Center units are in inches .
Table 38 : MT-FPS-FZL Allowable Design Strength ( ASD ) Load Data 1 , 2 , 3 , 4
Configuration
1 Bracket
+/ -Fx lb ( kN )
3360 ( 14.95 )
+/ -Fy lb ( kN )
2310 / H center ( 12.28 / H center
)
-Fz lb ( kN )
1140 ( 5.07 )
1 Tabulated directional values apply separately in each direction . A combination of loads must be considered separately , and an appropriate interaction equation defined by the design professional must be applied .
2 Tabulated values as shown does not include or account for anchorage . Anchorage must be determined separately and may reduce the overall capacity from the tabulated values . 3 Multiply tabulated values by 1.5 to convert AD values to Design Strength ( LRFD ). 4 H Center units are in inches .
|
Table 39 : MT-FPS-FZL Limit State Design ( LSD ) Load Data 1 , 2 , 3
Configuration
+/ -Fx lb ( kN )
|
|
|
|
+/ -Fy lb ( kN ) |
-Fz lb ( kN ) |
Fy |
Fz |
Fx |
1 Bracket |
4150 ( 18.46 ) |
3470 / H center ( 15.44 / H center
)
|
1385 ( 6.16 ) |
1 Tabulated directional values apply separately in each direction . A combination of loads must be considered separately , and an appropriate interaction equation defined by the design professional must be applied .
2 Tabulated values as shown does not include or account for anchorage . Anchorage must be determined separately and may reduce the overall capacity from the tabulated values .
3 H Center units are in inches .
2023
45