Pipe Shoe Technical Guide for North America Vol. 1 July 2022 | Page 42

Modular Pipe Shoes Technical Supplement

3.0 BEAM CONNECTORS 3.2 MP-PS ISG

Beam connectors for attaching MP-PS pipe shoes to steel beams

MP-PS ISG Applications

• Fastening MP-PS pipe shoes used as fixpoint to steel beams

• Recommended for use in Indoor or Outdoor with low to moderate pollution ( C3 ) or high pollution ( C4 )

MP-PS ISG Advantages

• Simpler installation — easier-to-adjust and retrofit method for mounting pipe shoes to steel beams

• Safer jobsites — clamping function to avoid welding and drilling

• Part of the MP pipe shoe system — an adjustable solution for virtually any relevant steel beam width

• Slim desgin — allows better access whenever insulation for hot piping needs to be wrapped around pipe shoe

• Suitable for stand-up , suspended and horizontal or vertical mounting against I-beam columns

Product Information

Surface finish

• Beam clamps and rectangular washer : DIN EN ISO 1461

• Baseplate : ZM300

• Bolts / Nuts : ISO 10684

• Retaining washers : ISO 10683

Material thickness All sheet metal parts : 0.20 in ( 5 mm ) Hot-dip galvanized Environmental conditions

Base material type

Yes

Outdoor , low to moderate pollution ( C3 ) or high pollution ( C4 )

Steel Steel beam thickness 0.125 to 1.42 in ( 3 to 36 mm )

Steel beam thickness min . mm / inch

0.125 in ( 3 mm )

Steel beam thickness max . mm / inch

Wrench size

Temperature resistance ( based on EN13480-3 )

Fire resistance ( Yes / No )

1.42 in ( 36 mm )

19 mm

-4 ° F to 572 ° F ( -20 ° C to 300 ° C )

No