72
Adjustable lanyards for work positioning
Usage: single
When the anchor is located above the user, the GRILLON lanyard is
connected to the harness ventral attachment point, so that the load is
comfortably distributed between the belt and leg loops. The user adjusts
his position by operating the handle, while holding the free end of the
lanyard.
GRILLON
Adjustable lanyard for work
positioning
Usage: double
The GRILLON lanyard can be used in double mode (on the harness
lateral attachment points) when the user must work with a supporting
surface for the feet. This type of attachment gives better load distribution
on the belt. The user precisely adjusts his position by pressing on the
lanyard's pivoting cam.
• Lanyard with fine adjustment system for precise
work positioning
• Can be used in two ways:
- in double mode on the side attachment points
of the harness, to distribute the weight on the belt
(user has weight on his feet): length is adjusted by
pressing on the pivoting cam)
- in single mode on the harness ventral attachment
point, to distribute weight between the waistbelt
and the leg loops (user is suspended): length is
adjusted by operating the handle while holding the
free end of the lanyard
• Removable protective sheath protects the rope
from abrasive surfaces and allows smooth rope
glide
The protection can be removed when the lanyard
is used in single mode, to bring the user closer to
the anchor
• Available in several lengths:
- GRILLON (L52A 002): 2 m, 435 g
- GRILLON (L52A 003): 3 m, 515 g
- GRILLON (L52A 004): 4 m, 595 g
- GRILLON (L52A 005): 5 m, 675 g
• Certification(s): CE EN 358, EAC
NOTE: GRILLON lanyards can also be used to
create adjustable anchors or horizontal lifelines;
please see specific versions of GRILLON lanyards
for these uses in the Anchors and Ropes section.