Actual size:
A. 20mm x 20mm x 50mm
B. 20mm x 20mm x 30mm
C. 102mm x 102mm x 40mm
The PSS process involves the plastic
surfaces of parts being impacted — or
shot — with a stream of particles, under
considerable force using compressed
air. This action results in a smoother,
matt-glossy finish with improved scratch
resistance. Significantly, no material is
removed from the printed parts during the
process, ensuring that tolerances are not
affected while the surface quality of the part
is greatly improved.
3D printed parts of virtually any geometry
are compatible with the PowerShot S,
including parts that incorporate fine
features and intricate detailing. Used
for standalone finished parts, the PSS
process is of particular importance if
additional post processing steps — such
as colouring / dyeing — are required. The
more homogenous surface produced by
PSS ensures dyes penetrate uniformly
to produce a consistent and high-quality
result.
The PowerShot S system can boost
efficiency and productivity of end use parts
considerably. With a cycle time of just 10
minutes for a medium sized batch of midsized
3D printed components — compared
with traditional tumbling techniques that
can take 6+ hours — the results can be
highly cost-effective both in terms of the
functionality and the life-cycle of parts
themselves.
Over the past decade, we
have grown the business
organically and steadily to
ensure the best possible
outcomes for our clients’
parts.
process over many years to achieve the
best possible results off our machines for
a wide range of relevant applications, that
continue to grow in scope. However, the
post processing of parts — from cleaning
through to further optimised surface finishes
— has always been a necessity for many of
our clients. Expanding our post processing
capabilities is a vital part of the business,
and the DyeMansion PowerShot S system
is an important next step in our expansion,
enabling us to offer our many and varied
clients the benefits of shot peened 3D
printed parts from a single source.”
Allen comments, “At 3DPRINT UK we have
honed and optimized the SLS 3D printing
For further information, please visit www.3dprint-uk.com
Issue 46 PECM 11