MEASUREMENT & MONITORING
Hydraulic Oil Flowmeter Calibration
Low cost hydraulic and
water flowmeter calibrations
undertaken in primary standard
facility. Oil and Hydraulic
flowmeters covering 0.1 to 700
l/min across varying viscosities
using our standard calibration
procedures can cover the
calibration of turbines, gear,
paddle, positive displacement,
helical, variable area, ultrasonic
and coriolis flowmeters. A
range of oils are available such
as, hydraulic oil, ISO 4113, IPA,
JET-A1, AVGAS and dielectric
fluids. Having a complete range
T860 EN 180x132.indd 1
70
PECM Issue 44
of transfer standard flowmeters
backed up with gravimetric
primary standard the Youngs’
laboratory is one the UK’s most
versatile facilities offering quick,
reliable and cost-effective
flow meter calibration. Water
flowmeter calibrations up to
4000 l/min also available.
Email: ay@youngcalibration.
co.uk
Tel: 01273 455572
Web: www.youngcalibration.
co.uk/calibration/oil-flow-
calibration
Bolt Thermocouple with 2m of Glass
Fibre Stainless Steel Over Braided Cable
Bolt sensors are generally
screwed into the surface which
normally increases the speed
of response and sensitivity of
the measurement. Suitable for
use up to +250°C. These are
available in type K or J with the
following bolt thread/pitch sizes:
M8 x 1mm / M10 x 1mm / M12 x
1mm. Bolt lengths available are
13 or 25mm.
All bolts have grounded
junctions and are available to
buy direct from
www.labfacility.com
29/04/2020 15:19