CONTROL & AUTOMATION
WAGO AT PPMA
WAGO
WAGO DEBUTS LEVER AND PUSH-BUTTON TERMINAL
BLOCKS AT PPMA
Stand A71 at PPMA 2018 (25-27 September)
sees WAGO launch two variants of its
TOPJOB® S family of rail-mounted terminal
blocks.
A push-button version and a lever-actuated
version, the first terminal block of its kind,
gives switchgear manufacturers a wider
choice for wiring assemblies, with three
different wiring options within the same
product range.
The clamping point of the push-button
terminal block is opened with any
screwdriver or similar operating tool. Feed-
through terminal blocks with push-buttons
are available for wire with a cross-section
between 0.14 to 25 mm².
96
PECM Issue 34
The push-button terminal block is available
in 2-, 3- or 4-conductor variants.
The lever-actuated variant, a world first
from WAGO, is equipped with a lever on the
field side, and a push-button or operating
tool-actuated connection on the secondary
side. The clamping point on the field side is
opened and closed by hand using the lever,
allowing installers to tell at a glance which
wires in an assembly are terminated. Both
the push button and lever actuators are
orange in colour, making them clearly visible
for