PECM Issue 33 2018 | Page 93

Saving with more performance 5 technologies, all the best, or the only one in the world, have been recognised as the strongest in the world to reduce costs and emissions. 1. Friction reduction, 2. power consumption of electric motors, programmable, 3. locating faults (just starting defects, leaks, explosion risks and many more), 4. durable cures for oil leaks without loss of production time, and 5. intelligent lighting which saves its cost inside one year while providing fine programming for relevant lighting conditions. All five are relevant for almost all areas, so visit the home-page. www.chambers-gmbh.de to confirm this for your area, and send your questions to [email protected] High‐end camera series ImageIR® from InfraTec with new high‐speed mode for higher frame rates and increased thermal resolution at the same time InfraTec offers an entirely new level of flexibility for its high‐end camera series ImageIR®. In standard mode, the familiar frame rates for full frame, half frame and sub‐frame are available with full spatial resolution. In high‐ speed mode, images can be taken with the identical FOV – while the frame rates rises more than three times the previous value and the thermal resolution increases at the same time. If users want to depict the smallest geometrical details, they use the native number of pixels of the camera detector of up to (1,920 x 1,536) IR pixels. www.infratec.eu/thermography/infrared‐ camera/imageir‐9400/ TGF600 Thermal Mass Flow Meters for Syngas New UV-light meter is compact, versatile and easy to use Syngas or ‘synthesis gas’ is a combination of hydrogen, carbon monoxide, small quantities of carbon dioxide and other trace gases. Syngas is the result of gasification of various carbon-containing fuels to produce a gaseous product with heating value. This is what we know as Syngas. Using the clear and well-organised display, measured results can be read at a glance. This new generation design is compact and hence extremely handy on the shop floor. Another user-friendly feature is the integrated USB port which enables the upload of the UV-Meter data easily to a PC or notebook, and recharges the lithium batteries which have a very long service life. Thermal mass flow meters are the most suitable flow meters for Syngas. Comate TGF600 flow meters are being fitted to environmentally sound Syngas engines manufactured in the UK. They generate substantially less noise and lower emissions than equivalent diesel engines. As a result, creating clean, on- demand electricity. TGF600 flow meters accurately measure the consumption of Syngas by the generators. Contact [email protected] or visit www.bellflowsystems.co.uk The UV-Meter has a wide range of interchangeable sensors covering wavelengths from 230 nm to 550 nm – UVA, UVB, UVC and VIS which makes it suitable for different manufacturing processes. Its compact sensors are only 14mm high to fit into small spaces and its two channel measuring means that different wavelength ranges can be recorded at the same time. The unit also has automatic sensor recognition For further information please contact us at [email protected] Bell Flow Systems now offering the New Dynasonics TFX-500w Ultrasonic Clamp-on Flow Meter. Providing an economical solution for measuring water flow bi-directionally. This new model is easy to install - thanks to its clamp-on design. This makes the TFX-500w ideal for existing projects. The TFX-500w is capable of measuring flow rate, velocity and water flow with precision and accuracy. A large and user friendly display screen completes the design. Thanks to its flexible range of sizing and temperature handling abilities, the TFX-500w is an extremely versatile flow meter. Typical examples include water systems, wastewater effluent, agricultural irrigation and industrial discharge. Contact us at Bell Flow Systems for more information on the Dynasonics TFX-500w Ultrasonic Clamp-On Flow Meter. www.bellflowsystems.co.uk Heraeus Fast Reponse Infra-Red Heater Provide The Answer at Tarkett Four fast response, medium wave infra-red (IR) heating modules from Heraeus Noblelight are helping Tarkett Ltd to significantly reduce the danger of flooring product manufactured at their Maidstone factory being spoiled or damaged in the event of unanticipated power cut-out or unexpected stoppage of the production line. Tarkett Ltd is a world-leader in flooring, with 12,000 employees and 34 manufacturing sites globally. It provides integrated flooring solutions to architects, facility professionals, contractors, distributors, installers and end users. The basic flooring production process consists of building up thicknesses of pvc paste on a pvc backing layer in 2m wide sections. www.heraeus-infraredsolutions.co.uk Tel: 0151 353 2710 Fax: 0151 353 2719 Issue 33 PECM 93