SPIROLIFT® vertical conveyors
feature an octagonal trough
and liner. The breaks in the
liner provide a resistance point
which help to prevent slippery
materials forming a rotating
plug, thereby encouraging the
material to move vertically
with the spiral face.
for
the
transport
of otherwise difficult to handle
materials, such as municipal dewatered
sludge, wastewater screenings, grit,
industrial sludges and other sticky,
viscous, stringy materials.
Not having intermediate and end
bearings allows a comparative
reduction in major maintenance
work. It also allows efficient and
direct transfer – horizontal, inclined
or vertical – into another conveyor.
SPIRAC’s proprietary liner, DURAFLO®
SPX, is designed specifically to ensure
long life. The DURAFLO®
SPX liner has a built-in
wear indicator with a
snap-in, snap-out feature
enabling easy replacement.
SPIRAC conveyors are
totally enclosed. There is
no spillage of the material
being conveyed and odours are
completely contained.
SPIRAC’s direct-drive design allows
a clean and efficient transmission
without the maintenance required by
belt and chain drives.
SPIROLIFT®
SPIRAC is the global leader in vertical
sludge conveying with hundreds of
SPIROLIFT® installations worldwide.
This proven technology offers
significant cost and operational
advantage over alternate methods of
sludge elevation and transport.
SPIROLIFT® vertical conveyors feature
an octagonal trough and liner. The
breaks in the liner provide a resistance
point which help to prevent slippery
materials forming a rotating plug,
thereby encouraging the material to
move vertically with the spiral face.
Wide-faced, short pitch spirals provide
a large lifting surface with very little
material fallback down the centre
of the spiral. Unlike shafted spirals
which may suffer from a build up of
material around the shaft, especially
at the discharge point, shaftless spirals
discharge material efficiently to the
receiving conveyor.
SPIROLIFT® vertical octagonal (OK)
conveyors are specially designed
to achieve vertical conveying of
dewatered sludges and other difficult
to transport materials.
For more information please contact.
SPIRAC Ltd.
Robert Gericke,
Technical Sales Engineer
Office line: +44(0) 1295 270 335
Mobile: +44(0) 7881 274 913
Office fax: +44(0) 1295 273 334
E-mail: [email protected]
Web: http://www.spirac.com
Issue 22 PECM
139