OSAWA - katalog | KL-TECH s.r.o. | www.klte.cz

KL-TECH s. r. o | www. klte. cz

UH- < 70HRC- Corner radius

CUTTING PARAMETERS

INFO

UH212

TYPHOON TA-HTA-4HTA

Material Group ISO 513

P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3

TYPHOON PU-HPU

TYPHOON SUH

TYPHOON ALH

TYPHOON HRC

TYPHOON SUH MINI

TYPHOON HL

C-SD-TA

LFTA

SUTA

HSS-HSS / CO DRILLS

MDTA

HF VH / UP

MEF

ALU

MEX

SQUARE RIB

Hardness / Rm < 45 HRC 45- 55 HRC 55- 60 HRC 60- 65 HRC

D( mm)

0.2

0.3

0.4

0.5

0.6

0.8

1.2

1.4

1.5

1.6 ap x ae ap x D ap x D ap x D ap x D Vc( m / min) 80-120 60-100 50-70 30-50

l1( mm) ap( mm) n( rpm) fn( mm / rev)

Vf( mm / min) n( rpm) fn( mm / rev)

Vf( mm / min)

≤ 6D	0.01	40000	0.003	240	40000	0.003	220	40000	0.002	190	40000	0.002	170
≤ 8D	0.01	40000	0.003	200	40000	0.002	180	40000	0.002	165	40000	0.002	145
≤ 10D 0.01		40000	0.002	170	40000	0.002	150	40000	0.002	135	40000	0.001	120
≤ 12D 0.01		40000	0.002	130	40000	0.001	120	40000	0.001	105	40000	0.001	90
≤ 6D	0.02	40000	0.004	320	40000	0.004	290	40000	0.003	255	40000	0.003	225
≤ 8D	0.01	40000	0.003	270	40000	0.003	240	40000	0.003	220	38200	0.002	180
≤ 10D 0.01		40000	0.003	220	40000	0.003	200	40000	0.002	180	34000	0.002	135
≤ 12D 0.01		40000	0.002	180	40000	0.002	160	40000	0.002	140	29700	0.002	90
≤ 6D	0.02	40000	0.006	480	40000	0.005	430	40000	0.005	385	31800	0.004	265
≤ 8D	0.02	40000	0.005	410	40000	0.005	370	40000	0.004	325	28700	0.004	205
≤ 10D 0.01		40000	0.004	340	40000	0.004	300	38200	0.003	255	25500	0.003	150
≤ 12D 0.01		40000	0.003	260	40000	0.003	240	33400	0.003	175	22300	0.002	105
≤ 6D	0.03	40000	0.007	560	40000	0.006	500	38200	0.006	430	25500	0.005	250
≤ 8D	0.02	40000	0.006	480	40000	0.005	430	34400	0.005	325	22900	0.004	190
≤ 10D 0.02		40000	0.005	390	40000	0.004	350	30600	0.004	240	20400	0.003	140
≤ 12D 0.01		35000	0.004	270	35700	0.003	250	26800	0.003	165	17800	0.003	95
≤ 6D	0.03	40000	0.008	640	40000	0.007	580	31800	0.006	405	21200	0.006	235
≤ 8D	0.03	40000	0.007	540	38200	0.006	470	28700	0.005	310	19100	0.005	180
≤ 10D 0.02		40000	0.006	450	34000	0.005	340	25500	0.004	230	17000	0.004	135
≤ 12D 0.02		37200	0.004	330	29700	0.004	240	22300	0.004	155	14900	0.003	90
≤ 6D	0.04	39800	0.010	800	31840	0.009	570	23880	0.008	380	15920	0.007	225
≤ 8D	0.03	35800	0.009	610	28640	0.008	440	21480	0.007	290	14320	0.006	170
≤ 10D 0.03		31800	0.007	450	25440	0.006	320	19080	0.006	215	12720	0.005	125
≤ 12D 0.02		27900	0.006	310	22320	0.005	220	16740	0.004	145	11160	0.004	85
≤ 6D	0.05	31800	0.012	760	25440	0.011	550	19080	0.010	365	12720	0.008	215
≤ 8D	0.04	28700	0.010	590	22960	0.009	420	17220	0.008	280	11480	0.007	165
≤ 10D 0.04		25500	0.008	430	20400	0.008	310	15300	0.007	205	10200	0.006	120
≤ 12D 0.03		22300	0.007	290	17840	0.006	210	13380	0.005	140	8920	0.005	80
≤ 6D	0.06	26500	0.022	1170	21200	0.020	840	15900	0.018	560	10600	0.015	325
≤ 8D	0.05	23900	0.019	890	19120	0.017	640	14340	0.015	430	9560	0.013	250
≤ 10D 0.04		21200	0.015	650	16960	0.014	470	12720	0.012	315	8480	0.011	185
≤ 12D 0.03		18600	0.012	450	14880	0.011	320	11160	0.010	215	7440	0.008	125
≤ 6D	0.07	22700	0.024	1090	18160	0.022	780	13620	0.019	525	9080	0.017	305
≤ 8D	0.06	20500	0.020	840	16400	0.018	600	12300	0.016	400	8200	0.014	235
≤ 10D 0.05		18200	0.017	610	14560	0.015	440	10920	0.013	295	7280	0.012	170
≤ 12D 0.04		15900	0.013	420	12720	0.012	300	9540	0.011	200	6360	0.009	120
≤ 15D 0.03		13600	0.011	290	10880	0.010	210	8160	0.009	140	5440	0.008	80
> 15D 0.02		11400	0.007	160	9120	0.006	120	6840	0.006	80	4560	0.005	45
≤ 6D	0.08	21200	0.025	1060	16960	0.023	760	12720	0.020	510	8480	0.018	295
≤ 8D	0.06	19100	0.021	810	15280	0.019	580	11460	0.017	390	7640	0.015	225
≤ 10D 0.05		17000	0.018	590	13600	0.016	430	10200	0.014	285	6800	0.012	165
≤ 12D 0.04		14900	0.014	410	11920	0.012	300	8940	0.011	195	5960	0.010	115
≤ 15D 0.03		12700	0.011	290	10160	0.010	210	7620	0.009	135	5080	0.008	80
> 15D 0.02		10600	0.008	160	8480	0.007	110	6360	0.006	75	4240	0.005	45
≤ 6D	0.08	19900	0.026	1030	15920	0.023	750	11940	0.021	495	7960	0.018	290
≤ 8D	0.07	17900	0.022	790	14320	0.020	570	10740	0.018	380	7160	0.015	220
≤ 10D 0.06		15900	0.018	580	12720	0.016	420	9540	0.015	280	6360	0.013	160
≤ 12D 0.04		13900	0.014	400	11120	0.013	290	8340	0.011	190	5560	0.010	110
≤ 15D 0.04		11900	0.012	280	9520	0.011	200	7140	0.009	135	4760	0.008	80
> 15D 0.02		10000	0.008	160	8000	0.007	110	6000	0.006	75	4000	0.005	45

HSS / CO-HSSP END MILLS

CARBIDE BURRS

602

OSAWA - katalog | KL-TECH s.r.o. | www.klte.cz | 页面 604