DIESEL
Combi Diesel Heater KIT
33513-26MIR
10 litre diesel combination heater and water heater. Extremely efficient,
compact and popular option. Comes with CP + control panel, 6m control
panel cable, black wall cowl, 100 cm pipe set.
John Guest water fittings and fuel pump.
Diesel fuel pipe and bracket not included
Technical Specification
Heats water from approx. 15 °C to
approx. 60 °C (in accordance with
standard EN 15033)
Boiler approx.
20 min,
heater & boiler
approx. 80 min
Max. 287 m³/h
Air flow rate
Current consumption (12 V):
Heater & boiler
Heat up the boiler
Water capacity 1.8–7a (during
normal operation)
Max. 1.8a
Diesel in acc. with
EN 590
10 litres
Pump pressure Max. 2.8 bar
System pressure
Rated thermal output Max. 4.5 bar
2000 / 4000 / 6000
W
Quiescent current approx. 0.001a
Weight without water Combi D 6
Without peripherals 16.9kg
With peripherals 18.3kg
Fuel
Rated thermal output in electrical
operation
Minimum installation dimensions in mm (please ensure that there is enough
room for installation and servicing work to be carried out).
1800w
900w: 3.9a /
1800w: 7.8a
Current consumption (at 230v)
Burner stages
Rated thermal output
Diesel consumption
2 3
4000w 000w
4520
ml/h 630
ml/h
**During normal operation at moderate heat output of 1000w.
Note: Vehicle-specific tank removal sets for facilitating connection of the Combi D 6 (E)
to the diesel tank are available from Truma on request.
CP Plus Controls
Wall Cowl WKCD
Pipe Set CDW
34400-02 (Bianco) 34501-01 (60cm)
34400-04 (Anthracite) 34501-02 (70cm)
Complete with extractor fan and
connecting cable (without sound
mufflers or exhaust ducts).
34501-04 (150cm)
Complete with sound mufflers for
combustion air and waste gas, incl.
lock washer and insulating duct. If
the pipe set needs to be shortened,
you will need the lock washer tool
to install the replacement lock
washer, see section “Miscellaneous”.
FOR A MORE OEM
COMPLETE
LISTING
PLEASE
LOG ONTO OUR PORTAL:
HOTLINE:
01283
586007
www.miriad-products.com/online-catalogue
[email protected]
80