− type of test performed − make , model , style and size of respirator tested , and − date and result of the test .
Hood and head top type PAPRs do not require fit testing as they cover the whole head and do not rely on a tight seal .
Competency of fit testers
Fit testers should be properly trained and proficient in the fit test method being used . Relevant competencies of a fit tester may include :
− knowledge of the respirators being fit tested − knowledge of the fit test method − ability to set up all applicable equipment and monitor its function − ability to carry out the test and evaluate the results , and − ability to identify likely causes of fit test failure .
Training workers on the correct use and maintenance of RPE
When issuing RPE , training must be provided to ensure that workers correctly use and maintain the RPE . Training can be carried out by :
− − − − − a health and safety consultant a trained person in-house a representative from an RPE manufacturer or supplier an occupational hygienist , or the holder of recognised qualifications in WHS with expertise or experience in this area .
Training in the use of RPE should cover the following :
− why RPE is required − when RPE is required to be worn − how RPE works − the limitations of RPE − how to correctly put on and take off RPE − how to conduct a fit check − how to clean and maintain RPE − when and how to replace filters and batteries ( including rechargeable batteries ), and − how and where to store RPE when not in use .
Ongoing training and supervision may be required to ensure workers correctly use RPE . Workers must also take reasonable care for their own health and safety , comply with any reasonable instruction , and cooperate with any reasonable policy or procedure of the PCBU relating to health or safety . This means a worker must use and wear RPE in accordance with any workplace policy and information , training or reasonable instruction given .
Fit checking
Fit checking enables workers to take reasonable care of their own health and safety while working with engineered stone .
A fit check is a quick check to ensure a fit tested respirator is properly positioned on the face and there is a good seal between the respirator and face . Fit checks do not replace the need for a fit test . Workers should follow the respirator manufacturer ’ s instructions on how to carry out a fit check .
Managing the risks of respirable crystalline silica from engineered stone in the workplace - Code of Practice 41 of 57