KL-TECH s.r.o | www.klte.cz
V045
V060
Cutting Data
Engraving Depth and Width Reference Chart
• To use the engraving chart, select your engraving width (w) on the vertical axis. Select your engraving insert
angle (45° or 60°), and follow the horizontal line from the (w) axis to the intersection with the insert angle.
• Follow the vertical line from this intersection point to the engraving depth (t) axis to determine the engraving
depth.
V045/V060 T1W06 >>
mm inch
2.5 0.10”
Reference chart
of engraving depth and width
0.09”
2.0
99619-V060
Į
0.08”
99619-V045
Į
0.07”
1.5
0.06”
0.05”
1.0
0.04”
0.8mm
0.03”
0.50
0.02”
Work Material
inch
0.02”
0.03”
0.04”
0.05”
0.06”
0.07”
0.08”
0.01” 0.01”
0.005”
0.015”
0.025”
0.035”
0.045”
0.055”
0.065”
0.075”
S RPM f (mm/rev.) Grade of Insert
Carbon steel 5000~40000 0.008~0.05 NC2071,NC2032
Alloy steel 5000~40000 0.008~0.03 NC2032,NC2071
Stainless Steel 5000~40000 0.008~0.05 NC2071,NC9031
Cast iron 5000~40000 0.008~0.03 NC2032
AluminumǑNon-Ferrous Metal 5000~40000 0.008~0.08 NC2071,NC9031
Hardened steel up to 56 HRC 6000~35000 0.003~0.01 NC2035
Tmax.:2mm
1st 2nd 3rd 4th 5th 6th ~ Fine
¿QLVKLQJ
Carbon steel 0.8 0.6 0.3 0.2 0.1 ~ ~ 0.1
Alloy steel 0.5 0.4 0.3 0.3 0.2 0.2 0.1 0.1
Stainless Steel 0.5 0.4 0.3 0.3 0.2 0.2 0.1 0.05
Cast iron 0.8 0.6 0.3 0.2 0.1 ~ ~ 0.1
AluminumǑNon-Ferrous Metal 1.0 0.8 0.2 ~ ~ ~ ~ 0.1
Hardened steel up to 56 HRC 0.2 0.2 0.15 0.15 0.1 0.1 0.1 0.05
Ap
Material
62 Nine9 Cutting Tool & Tool Holders