Nine9 | KL-TECH s.r.o. | www.klte.cz Nine9 | Page 24

145°
+
90°
KL-TECH s.r.o | www.klte.cz
WSP Spotting New Geometry of Spotting Tool
NC2033
Combined spotting and chamfering 145° + 90° >>
• Reduces process to one operation. Shorten cycle time.
• Use to spot prior to drilling with high performance drills for higher accuracy of hole position.
• Good support spotting process for round parts.
1 process provides 2 applications
90° Chamfering
142°Spot Drilling
WSP Spotting
2 in 1
90°
145°
Inserts >>
NC2033: • Fully ground cutting edge and relief angle.
• Universal grade for steel and cast iron.
• Each insert has 2 cutting edges.
Parts No.
013203 N9MT0802M04C-NC2033
013204 N9MT0802M05C-NC2033
013205 N9MT0802M06C-NC2033
014219 N9MT11T3M08C-NC2033
Coating Grade
TiAlN
TiAlN
014220 N9MT11T3M10C-NC2033
014221 N9MT11T3UNC25-NC2033
014222 N9MT11T3UNC31-NC2033
014223
Thread Size
K20F
K20F
Code * D1 ±0.05 D2 L2
M4x0.7 3.30 4.20 0.93
M5x0.8 4.20 5.25 1.14
M6x1.0 5.00 6.30 1.39
M8x1.25 6.80 8.40 1.81
Dmax. Tmax.
2.83
8
2.52
2.24
4.11
13
M10x1.5 8.50 10.50 2.28 3.53
1/4-20 UNC 5.08 6.70 1.55 4.70
5/16-18 UNC 6.53 8.40 1.90 N9MT11T3UNC38-NC2033 3/8-16 UNC 7.94 10.00 2.22 3.72
016205 N9MT1704M12C-NC2033 M12x1.75 10.25 12.60 2.91 6.61
016206 N9MT1704M14C-NC2033 M14x2.0 12.00 14.70 3.22 016207 N9MT1704M16C-NC2033 M16x2.0 14.00 16.80 3.51
Note:
D1
D2
TiAlN
TiAlN
K20F
K20F
* D1 refer to the Tap Pre-drilling sizes.
* Technical information, please refer to page 34.
22 Nine9 Cutting Tool & Tool Holders
13
20
4.20
5.87
5.11