NikkoTools | KL-TECH s.r.o. | www.klte.cz NIKKO_katalog | Page 371

WARNING
read carefully before using our products
-
-
-
-
-
-
-
-
-
Tools may shatter if broken. The wearing of eye protection is strongly advised in the vicinity of the working area.
The correct using condition and handling of our tools is essential to secure maximum useful life and hazard free operation.
Cutting tools have sharp edges and care must be taken when handling to avoid cuts/lacerations to unprotected hands.
Safety gloves must be worn when handling and clamping the tools. Make yourself sure that, once the tool is clamped on the machine, gloves are not entangled in the
cutting edges. Never get close to or touch rotating or moving tools.
Tools may hurt the user’s feet when falling off. Safety shoes should be put on at all time.
While fitting the tool to machine spindles and/or sleeves, care should be taken to avoid subjecting them to shock or impact.
Check that workpieces are properly seated and securely held in the chuck before switching on the machine power.
Do not use a tool whose cutting edges are worn-out or chipped severely.
Grinding operations may produce potentially hazardous dust particles or vapour. Adequate ventilation equipment should be provided.
Sorma S.p.A. / © Copyright 2014. All rights reserved. All the trademarks or tradenames mentioned belong to their respective owners.