KITCHEN & BATH PLUMBING
MOTION HOSES & QC
NEOPERL ® Quick Connectors
NEOPERL ® Quick Connectors provide a very quick and highly secure way of connecting outlet and kitchen hoses .
Compared to using a brass fitting / nut , the Quick Connector offers many benefits . An easy push-in motion is all that is required to fit it – no twisting or torquing is necessary . There is a positive ‘ click ’ for a secure connection , which makes it easy to fit the Quick Connector blindly in awkward positions under the deck . It is also easy to disconnect it if needed . However , it is impossible to unintentionally disconnect it .
Clip Quick Connector ( CQC )
The CQC with one clip has room for one check valve . Its push release mechanism means it can be disconnected with one finger .
Clip Quick Connector CQC with one clip
The double-clip version of the CQC is to be used like an adaptor . It has room for two check valves ( as stipulated in some regulations ); one can be flow regulating . Its push release mechanism enables disconnecting it with one finger .
Double-Clip Quick Connector DCQC with double-clip adaptor
Sleeve Quick Connector ( SQC )
If necessary , the SQC can be easily disconnected using its slide-click feature . It offers room for two check valves ( as stipulated in some regulations ).
Sleeve Quick Connector SQC with slide-click feature
30 | Hoses
TECHNICAL
AVT I DN13 – DN50
INDUSTRIAL
APPLICATIONS
EPDM
Features & Information
Application
AVT-I hoses were developed to meet customer requirements for anti-vibration hoses withstanding a
working pressure of up to 27.5 bar. They are suitable for connecting pumps, boilers or surge tanks to the
water network where medium to high pressure prevails.
Technical Specification
AVT I 13AVT I 19AVT I 25AVT I 32AVT I 40AVT I 50
Max. operating
temperature90°C
194°F90°C
194°F90°C
194°F90°C
194°F90°C
194°F90°C
194°F
Max. temperature110°C
230°F110°C
230°F110°C
230°F110°C
230°F110°C
230°F110°C
230°F
27.5 bar
400 psi27.5 bar
400 psi27.5 bar
400 psi20.5 bar
300 psi20.5 bar
300 psi17.5 bar
250 psi
Burst pressure> 110 bar
> 1600 psi> 110 bar
> 1600 psi> 95 bar
> 1400 psi> 62 bar
> 900 psi> 62 bar
> 900 psi> 52 bar
> 750 psi
Tensile strength> 2000 N
> 450 lbf> 2500 N
> 562 lbf> 3000 N
> 674 lbf> 3000 N
> 674 lbfn/an/a
Bending radius90 mm
3.5 “90 mm
3.5 “110 mm
4.3 “130 mm
5.1 “150 mm
5.9 “180 mm
7.1 “
Outer diameter (braided)19 mm
0.7 “27 mm
1.1 “34 mm
1.3 “42 mm
1.7 “54 mm
2.1 “66 mm
2.6 “
Inner diameter of fitting10 mm
0.4 “15 mm
0.6 “20 mm
0.8 “26 mm
1.0 “32 mm
1.3 “41 mm
1.6 “
70 l/min
13.2 gpm145 l/min
32 gpmn/an/an/an/a
SSTSSTSSTSST
1”
1” NPSM
1” NPT male11/4”
11/4” NPSM
11/4” NPT male11/2”
11/2” NPSM
11/2” NPT male2”
2” NPSM
2” NPT male
Max. working pressure
PLATINOX SLP DN10-DN32
Flow rate (300 mm, 3 bar,
open atmosphere)
female
Braiding
SST
1/2”
1/2” NPSM
1/2” NPT
male
Inlet
+ outlet fittings
Length: according to customer need
SST
3/4”
3/4” NPSM
3/4” NPT Elbow
male
PLATINOX SLP DN10-DN32
EPDM / FLEXCORE
length ±5
female
female
LAVINOX / PLATINOX
male
male
Elbow
Length: according to customer need
Structure
length ±5
Fitting Material Options
stainless steel braiding
58 | Hoses
EPDM
CW617N
male
Hoses | 59