Multifunction Digital Heat Press Machine Operating Instructions 黄色把手新款Multifunction Digital Heat Press Machine Ope | Page 4

II. Set temperature required
Set the temperature and time according to the table below and get the specific corresponding
temperature and timing setting. (Temperature is measured in Degrees Fahrenheit.)
Press
Object
Mugs
Tiles
Metal board
Plate
T-shirt
Initial
Temperature
230
230
230
355
355
Highest
Temperature
330
330
300
355
355
Proper Heating Time
40
40
40
150
Sublimation paper: 30~50 sec
T-shirt paper: 10~20 sec
A. Initial Temperature Setting (Range: 200~380 Degree F)
Press the
“mode button” ONCE, see the “set light” turning red. Then press the “plus /
minus key” to set the initial heating temperature.
B. Highest Temperature Setting (Range: 200~430 Degree F)
Press the
“mode button” for THE SECOND TIME; see the “temperature light” turning
red. Then press the “plus or minus key” to set the highest heating temperature.
C. Proper Heating Time Setting (Range: 0~999 Sec.)
Press the
“mode button” for THE THIRD TIME; see the “time light” turning red. Then
press the “plus or minus key” to set the proper heating time.
D. Finish the Setting and Stands by to Work
Press the “mode button” for THE FOURTH TIME; finish the setting and the machine stands
by to work.
 The machine has a self-locking function for temperature setting.
---If the starting temperature is set to 340 degrees, the machine will automatically limit the
maximum temperature setting range from 340 to 430 degrees F.
---Conversely, if setting the maximum temperature as 250 degrees F at first, the machine
will automatically limit the starting temperature setting range from 200 to 250 degrees F.
 Initial heating temperature always =< Highest heating temperature