2.0 . MT COMPONENTS
2.2 . MT PANEL CLIPS
MT-CC-40 / 50 M OC
Description M-shaped channel connector plate for fixing panels to MT channels .
Material Specifications
Standard 1 |
Grade 1 |
F y , ksi ( MPa ) |
F u , ksi ( MPa ) |
GB / T 700 |
Q235 B |
34.08 ( 235 ) |
53.66 ( 370 ) |
Corrosion Protection
Hot-Dipped Galvanized ( HDG ) MT-CC-40 / 50 M OC
Ordering Information
Description |
Weight Per Piece lbs ( kg ) |
Quantity Piece ( s ) |
Item No . |
|
MT-CC-40 / 50 C
OC
|
0.26 ( 0.12 ) |
8 |
2353779 |
Figure 3 . MT Channel Connection
Table 3 . Allowable Strength Design ( ASD ) Load
Data 1 , 2 , 3 , 4
Fx |
F z |
lb ( kN ) |
lb ( kN ) |
65 ( 0.30 ) |
130 ( 0.58 ) |
1 Minimum safety factor , Ω , for tabulated values is 3.5 . 2 Multiply tabulated values by 1.5 to obtain minimum Load and Resistance Factor Design ( LRFD ) values . 3 Tabulated values are for panel clip only .
4 See Figure 3 .
Table 4 . Limit State Design ( LSD ) Load Data 1 , 2 , 3
F x |
F z |
lb ( kN ) |
lb ( kN ) |
108 ( 0.48 ) |
207 ( 0.92 ) |
1 Minimum resistance factor , φ , for tabulated values is 0.16 . 2 Tabulated values are for panel clips only . 3 See Figure 3 .
23