Morphix® Suture Anchor System – Surgical Technique Guide Morphix® Suture Anchor System – Surgical Technique | Page 8

Product Ordering Information !!!!!!! MORPHIX ® SUTURE ANCHOR Part No. 1000-03-225 1000-03-235 1000-04-125 1000-04-235 1000-04-245 1000-04-255 Description Morphix, 2.5 mm Morphix, 3.5 mm Morphix, 2.5 mm Morphix, 3.5 mm Morphix, 4.5 mm Morphix, 5.5 mm Diameter, 2 USP Diameter, 2 USP Diameter, 1 USP Diameter, 2 USP Diameter, 2 USP Diameter, 2 USP #2 #2 #0 #0 #2 #2 Sutures Sutures Suture Double Armed with Tapered Needles Sutures Double Armed with Tapered Needles Sutures Double Armed with Tapered Needles Sutures Double Armed with Tapered Needles ! SINGLE USE INSTRUMENTS Part No. 1000-10-025 1000-10-035 1000-10-045 ® Morphix Procedure Pack includes Drill Guide and 160 mm Drill Bit. Description 2.5 mm Procedure Pack, Single Use, Sterile 3.5 mm Procedure Pack, Single Use, Sterile 4.5 mm Procedure Pack, Single Use, Sterile ! This brochure is presented to demonstrate the surgical techniques utilized by Samuel Adams, M.D. MedShape, as the manufacturer of this device, does not practice medicine and does not recommend this or any other surgical technique for use on a specific patient. The surgeon who performs any procedure is responsible for determining and utilizing the appropriate techniques for such procedure for each individual patient. MedShape is not responsible for selection of the appropriate surgical technique to be utilized for an individual patient. Always refer to the package insert, product label and/or product instructions prior to using any MedShape product. For further product information or to arrange a product demonstration, please contact your local MedShape representative or call Customer Service at 877-343-7016. You can also visit www.medshape.com. MedShape, Inc. 1575 Northside Drive, NW Suite 440 Atlanta, GA 30318 T: 877-343-7016 F: 877-343-7017 CAUTION: Federal (USA) law restricts this device to sale by or on the order of a physician. ©MedShape, Inc., 2014. All rights reserved. Printed in the USA. Protected by Patent No.: US 8,069,858. Other U.S. and International Patents Pending. MK-10118 Rev 00. Issued 06/2014. PEEK Altera and Morphix are registered trademarks of MedShape, Inc. All other trademarks are trademarks of their respective owners or holders. Page 7