Modular Support Systems Technical Supplement Guide
2.0 PRODUCTIVITY COMPONENTS
1
MH-EMT STRUT CLAMP — 45EMT
Product Features
• Pre-assembled out of box ; tightening screw at 45 ° angle for easy access
• Sized for electrical metallic tubing ( EMT )
• Innovative design requires no nuts for fast and easy assembly
• Manufacturers Standardization Society MSS-SP-58 ( Type 1 )
Scan for CSA approval documentation
3
301579
Material Specifications
Material Finish Approvals / Listings
Carbon steel Electro-galvanized
CSA Group ( Hardware for the support of conduit , tubing , and cable )
Load 1
Load 2
Load 3
Technical Information
Description Bolt Diameter x Length
Box Qty .
Wrench Size ( in )
Required Installation Torque ( ft-lb )
A Dimension ( in )
B Dimension ( in )
C Dimension ( in )
Allowable Load 1 ( lb )
Allowable Load 2 ( lb )
Allowable Load 3
( lb ) Item No .
MH-EMT45 1 / 2 " PG 5 / 16 " -18 UNC x 3 / 4 " 100 1 / 2 " 5 2 " 5 / 8 " 13 / 16 " 200 50 30 2008821 MH-EMT45 3 / 4 " PG 5 / 16 " -18 UNC x 3 / 4 " 100 1 / 2 " 5 2 3 / 16 " 3 / 4 " 1 1 / 16 " 200 50 30 2008822 MH-EMT45 1 " PG 5 / 16 " -18 UNC x 3 / 4 " 100 1 / 2 " 5 2 1 / 2 " 7 / 8 " 1 5 / 16 " 200 75 40 2008823 MH-EMT45 1-1 / 4 " PG 5 / 16 " -18 UNC x 1 " 50 1 / 2 " 5 2 13 / 16 " 1 1 / 16 " 1 11 / 16 " 200 75 40 2008824 MH-EMT45 1-1 / 2 " PG 5 / 16 " -18 UNC x 1 " 50 1 / 2 " 5 3 / 16 " 1 3 / 16 " 1 7 / 8 " 200 100 40 2008825 MH-EMT45 2 " PG 5 / 16 " -18 UNC x 1 " 50 1 / 2 " 5 3 1 / 2 " 1 3 / 8 " 2 3 / 8 " 200 100 50 2008826 Safety factor available upon request .
INSTALLATION INSTRUCTIONS
Installation instructions for use ( IFU ) are included with each product package . They can also be viewed or downloaded online at www . hilti . com . Because of the possibility of changes , always verify that downloaded IFU are current when used . Proper installation is critical to achieve full performance . Training is available on request . Contact Hilti Technical Services for applications and conditions not addressed in the IFU .
9 2022