Modular Support Systems Technical Supplement Guide
2.0 PRODUCTIVITY COMPONENTS MH-SLT SPEED LOCK TRAPEZE NUT
Product Features
• Nut and washer can be installed at any position on the threaded rod , for quicker and more accurate trapeze building
• Use split nut only in conjunction with slotted washer and 1-5 / 8 ” wide strut
Material Specifications
Material Finish
Plate - Carbon steel , DIN EN 10149-2 , S460MC Electro-galvanized
A
B
Note : Split Nut ( A ) must always be used with Slotted Washer ( B ). Engage by tightening to specified torque .
Technical Information
Description
Box Qty .
Required Installation Torque ( ft-lb )
Allowable Tension Load ( lb )
Wrench Size ( in )
A Dimension ( in )
B Dimension ( in )
C Dimension ( in )
D Dimension ( in ) Item No .
MH-SLT 1 / 2 " EG 40 22 ft-lb 1350 7 / 8 " 1 3 / 4 " 1 7 / 8 " 3 / 4 " 9 / 16 " 2008781 Safety factor available upon request .
INSTALLATION INSTRUCTIONS
Installation instructions for use ( IFU ) are included with each product package . They can also be viewed or downloaded online at www . hilti . com . Because of the possibility of changes , always verify that downloaded IFU are current when used . Proper installation is critical to achieve full performance . Training is available on request . Contact Hilti Technical Services for applications and conditions not addressed in the IFU .
7 2022