Modular Support Systems Technical Guide, Edition 2
3.0 Modular Support System
3.2.3 MT System Connectors
MT-C-Q1 FL / MT-C-Q1 FL OC
Description
2-hole angle connector Preassembled with MT Fast Lock for channel-to-channel assembly.
Material Specifications
Standard 1 Grade 1 F y, ksi( MPa) F u, ksi( MPa) DIN EN
DD11 24.65( 170) 63.82( 440)
10111:2018
1 Mechanical properties of DIN EN 10111:2018 grade DD11 meet or exceed the mechanical properties of ASTM A1011 SS Grade 33.
Corrosion Protection
Description |
Environmental Conditions |
MT-C-Q1 FL |
Dry indoor conditions( C1)
Indoor with temporary condensation( C2)
|
MT-C-Q1 FL OC Outdoor, low to moderate pollution( C3 / C4- low) |
Ordering Information
Description
Weight Per Piece, lbs( kg)
Quantity Piece( s)
Item No. MT-C-Q1 FL 0.27( 0.12) 16 2399638 MT-C-Q1 FL OC 0.27( 0.12) 16 2399673 mm( in)
Figure 36 – MT 2-Hole Angle Connector
Table 174- Allowable Strength Design( ASD) Load Data 1, 2, 3
Fx Fz lb( kN) lb( kN)
607 607
( 2.70)
( 2.70)
1 Minimum safety factor, Ω, for tabulated values is 3.30. 2 Multiply tabulated values by 1.5 to obtain minimum Load and Resistance Factor Design( LRFD) values. 3 See Figure 36.
Table 175- Limit State Design( LSD) Load Data 1, 2
Fx Fz lb( kN) lb( kN)
985 985
( 4.35)
( 4.35) 1 Maximum resistance factor, φ, for tabulated values is 0.49.
2 See Figure 36.
A.
MT-30 / 30D / 40D / 50 / 50U / 50D / 50DU / 60 / 60D
96 Modular Support Systems Technical Guide Edition 2 | Installation Systems Hilti, Inc. 1-800-879-8000 | en español 1-800-879-5000 | www. hilti. com | Hilti( Canada) Corporation | 1-800-363-4458 | www. hilti. ca