Miteck systems Pvt. Ltd Miteck systems Product catalogue | Page 3

P ULSE JET BAGHOUSE DUST COLLECTORS
C irculat T angentional entry & A ccesssories
MODULAR BAGHOUSEDUST COLLECTORS
COMPACT, MODULAR DESIGN
Compact Baghouse (MB) delivers reliable, efficient, continuous-
duty, pulse-jet operation. The MB advantage is found in the break-
through technology of High efficient bag filters.
High efficient bags offer longer bag life and reduced emissions.
This MB provides reliable service with easy maintenance. Comput-
er designed inlets and deflector plates, coupled with maximized
bag spacing, result in optimal airflow with minimal abrasion. Ad-
vanced valves, providing 50% more cleaning air, result in a
more efficient operation. Over the life of the collector, no other
bag house can provide this much value.
Pulse Jet Bag Filter [ ON-LINE , OFF- LINE ]
R egular H opper E ntry
The pulse jet bag filter in its most rudimentary form basically consists of the
filtration elements housed in a casing. Below this casing is a hopper with a
discharge valve, to continuously remove the dust that is collected on the bags.
The entire unit is supported from the ground on structural legs. A caged ladder
provides access to the top of the unit for maintenance.
The dust laden air enters through the hopper by suction (normally) or (positive
pressure).
The heavier dust particles fall off at the entry itself,Because of baffle plate with
service platform while the lighter dusts get carried upward to the bags.
C ircular T angentional entry
[ T-BG ]
The small footprint of the T-BG combines a cyclone precleaner and
a baghouse into one unit. It features a powerful yet energy-effi-
cient cleaning system, eliminating the need for compressed
air to clean the bags. The gas enters into the bag filter tangentially
at the bottom of the casing.
This gives the dust laden gas a circular motion which helps in
removing the heavy & coarser particles that are present in the gas
stream in a manner similar to a cyclonic collector.
These collected particles are directly discharged into the hopper. It
is only the very fine particles that get carried to and collected
on the bag surface. Thus the total dust load on bags is reduced
making it possible to maintain lower pressure drop across bags.
This also permits the use of lesser frequency of bag pulsing, which
in turn increases bag life.
Due to its circular construction, these bag filters can withstand
more +/- pressure as compared to normal rectangular bag
filters. The circular construction of bag filter also ensures leak proof
ness. The possibility of dust accumulation inside casing
is eliminated.
F lush M ounted - I nsertable
Transfer points involving two conveyors or from one conveyor to /
from other material handling equipment often involve isolated point(s)
where free stand alone bag filter(s) can be an expensive proposition.
Space availability on ground is also an issue at times. Typically, these
insertable bag filters units are without any hopper. The unit can be
suitably positioned on the conveyor directly. On pulsing, dust falls back
onto this conveyor, thus avoiding a need for a separate dust discharge
hopper.
Depending on the height of fall of dust, two such insertable bag filters
may be required – one at the end of the discharging conveyor and one
on the receiving conveyor. When a single unit is used, it is normally on
the receiving conveyor – as shown in the adjoining figure – this being
where generation of dust is higher due to impact. These type of units
are also optimal solutions for venting of bins / silos / hoppers. The
units in this construction are mostly standardized and pre-engineered,
though customized variations can be offered where necessary.
5
The filter materials, providing the ideal cleaning and having
practically assembly and dissasembly , are produced by
Hi-technology.
Bag Materials
Polyester
Rayton
Nomex PolyPropilen
P54 Fiberglass
PTFE Poliacrinitril
Electronic Timer controlled by
PLC, (Optional Delta ∆P)
The dust collected in the
bags are cleaned by high
efficient pulse valve .
6 5