METASYS
HVAC
BUILDING MANAGEMENT
SYSTEM CONTROL PRODUCTS
CONFIGURABLE FIELD CONTROLLERS ATC1510 TERMINAL UNIT CONTROLLERS
TECHNICAL SPECIFICATIONS
Mounting
Dimensions ( Height x Width x Depth )
Weight Compliance
BACnet International
Mount the controller using a 35 mm DIN rail , or three screws and the integral mounting clips on the controller .
Ensure that the controller is mounted so that the side with the outputs / powerinput is “ up ”.
If IP20 covers are not in use , or if local regulations do not allow surface mounting , the controller must be mounted in or on a panel .
The IP20 covers and cable strain reliefs have been designed to permit surface mounting in certain countries .
165 x 130 x 63 mm including terminals and mounting clips 165 x 165 x 63 mm ( With IP20 Cover ) 0.6 kg
Johnson Controls declares that this product is also in compliance with the essential requirements and other relevant provisions of the EMC Directive and Low Voltage Directive ( IEC / EN60730-1 ). Declared as an Electronic Independently-Mounted Control for mounting in or on a panel
BACnet Testing Laboratories ( BTL ) Protocol Revision 15 Listed BACnet Application Specific Controller ( B-ASC )
ADDITIONAL PRODUCT DECLARATIONS
Purpose of control |
Operating Control |
Construction of control and whether the control is electronic |
All Models : Electronic Independently Mounted Control - Intended to be mounted in a remote panel |
No . of cycles |
See : Input and Output Capabilities |
Type 1 or Type 2 action |
TYPE 1 . C ( Micro-interruption ) for relays |
External pollution situation |
All Models : Pollution Degree 2 |
Rated impulse voltage |
4000 V |
Ball pressure temperature |
90 ° C |
Binary - relay ( Outputs ) |
Reference all relay commons to the same pole of the supply circuit |
Binary - triacs ( Outputs ) |
Reference all triac commons to the same pole of the supply circuit |
138 European Products Catalogue 2021