LIVING WELL WITH COPD
C4-5
C3
Steps to put in the Batteries
in the Controller
C1
C1
Steps to use the AC adapter
in the Controller Steps to put together the
Handset Body.
STEP 1: Put MAGNAIR on a flat surface
and plug the round end of AC adapter
into the hole on the side of MAGNAIR. STEP 1: If this is a new Handset Body,
wash your hands.
D2
C4-5
C1
C2
STEP 1: To open the battery door, put
your thumb on the black tab and push
hard.
STEP 2: Open the top of the Handset
Body.
C2
D2
C2
STEP 2: Plug the AC adapter into the
wall. It’s okay if there are batteries in the
Magnair, the AC adapter won’t charge or
hurt them.
D3
C3
C3
STEP 2: Put 4 AA batteries in the
opening. Match the battery + sign
with the + sign in the opening and the
battery – sign with the – sign.
D3
D4
C3
STEP 3: Place the Aerosol Head into the
Handset Body. DO NOT touch the center
of the Aerosol head.
STEP 4: When you put the Aerosol
Head in, make sure the small tab on the
side lines up with the matching notch in
the Handset. If inserted incorrectly, the
inhalation solution will leak.
C4-5
C4-5
D4
D5
C4-5
D2
D2
STEP 3: Close the battery door until
you hear it “click”. NOTE: If you only
use batteries, they will last about 2
weeks. Make sure you have extra
batteries handy. If you are not going to
use the nebulizer for more than 30 days,
take out the batteries.
D5
D6A
D2
D6A
D6B
18
STEP 5: Close the Handset Body. You
may hear a click.