become loose. If you have lost the instructions to your scooter it’ s easy to forget what you did when you first put it together! Remember to tighten each bolt on your clamp a little bit in turn, work your way through the bolts and then start again.
It’ s surprising how many people mistake wobbly bars for something more serious, when it’ s simply about tightening your clamp up correctly. The allen keys provided with your scooter are great to get your scooter first set up, but it is worth investing in some high tensile keys which are much stronger and less likely to round.
Tip – If you find you are struggling to loosen bolts try sliding a short length of pipe( or similar tubing) over the long end of the key to give you a little more leverage. It is essential that you apply a down force towards the bolt head before and whilst turning the key to ensure a strong contact between the two parts thus avoiding rounding the bolt head. A sharp tap with a hammer can also help get the bolt moving BUT be careful not to round the bolt.
Follow our simple tips and your scooter should last you a little longer.
Thanks For Reading This PDF Guide Line. If You Like It Please Share It
** Please Do not try to copy it without proper permeation **