HG1710
Setup Instructions
Floor Protection
• Placing the product on top of wood flooring for a long period of time may cause
damage to the floor. To avoid possible damage, please make sure to place carpet or
similar padding in between the product and floor.
Do not move the product on its wheels through wood floors, rough granite
floors, or narrow spaces. If you must move the product in these types of
environments, 2-3 people are required to lift the product up off of the floor
while holding onto the back rest or the bottom frame of the product. Do not
lift the product up by the arm rests.
NOTE
HG1710
Product Specification
Product Specification
Model: HG1710
Description: Massage Chair
Rated Voltage/Frequency: 110-120V ~ 60Hz
220-240V ~ 50Hz/60Hz
Rated Power Consumption: 240W
Recommended Usage Time: 20 minutes
Noise:≤58dB
Standby Power Consumption: ＜0.5W
Safety Design: Class Ⅰ
Used Materials: PVC, PA, Steel, Electric & Electron Parts
MATERIAL
PU
LEATHER
CLOTH
WOOD
Moving the Product
• Place your fingers/hands on the grooves located on the back cover to lift up the
back part of the product at an angle off of the floor. Push the product forward and
then carefully place it down once the product is in the desired area. Do not attempt
to move the product any other way other than what has been instructed in this
instruction manual.
NOTE
16
Please turn off the product before attempting to move the product. Make
sure that the power cord has been disconnected from the product and that
all other visible wires are lifted off of the floor.
Instruction Manual
Instruction Manual
17