HG1710
Setup Instructions
HG1710
Setup Instructions
• The hooks on the arm rest will be hooked onto the matching grooves on the side of
the chair. (Figure 5)
• Holding the arm rest with your hands, lift the back of the arm rest higher than the front.
The hook located towards the front of the arm rest will be connected to the front part
of the steel frame. The hook towards the back of the arm rest will be inserted into the
bottom of the steel frame. Please make sure that the plugs are inserted into the chair
when performing this step to avoid the plugs getting stuck in between the arm rest and
chair. (Figure 6)
Adjusting the Head Cushion/Back Rest Pad
• The head cushion is designed with 3 adjustable layers and with a fold-down design
• Separate the head cushion to allow it to fall all the way down to the back area to
reduce the intensity of the back massage
• The back rest pad can be installed or uninstalled using the zipper located at the top
of the product (Figure 1)
• To adjust the head cushion, turn the cushion upside down and insert the flap through
the strap that is fixated on the top of the product (Figure 2)
• Flip the head cushion down when you are finished adjusting the position of the head
cushion (Figure 3)
Back Hook
Front Hook
Flap
Zipper
Strap
Top Hooks
(Qty: 2)
Figure 6
Figure 5
NOTE: The wires must be inserted all the way
inside the chair frame to avoid it getting stuck.
• Mount the arm rest to the chair frame. The mounts on the arm rest will slide into their
respective locations on the frame of the chair without having to apply any force. Slightly
press down on the arm rest to lock it into place. Press the arm rest down again to make
sure the hooks are securely fixated onto the steel frame. (Figure 7)
• Find the installation hole that is located near the front part of the fixed steel frame. Using
a hex wrench, screw in the appropriate bolts that came included with your product.
(Figure 8)
• Find the installation hole that is located near the back part of the fixed steel frame.
Using a hex wrench, screw in the appropriate bolts that came included with your
product. You have successfully installed the arm rest. Repeat the same steps for the
other arm rest. (Figure 9)
Slightly Press Downward
Seat Cushion
Figure 8
Figure 1
Figure 2
Flip head cushion down
Figure 3
Arm Rest
Calf Rest
Note: Hole is located towards
the inner front part of the arm rest
Arm Rest
Figure 9
Back Cover
Figure 7
14
Instruction Manual
Note: Hole is located towards the
back part of the arm rest
Instruction Manual
15