HG1710
HG1710
Setup Instructions
Method of Usage
• Adjusting the Angle
Play Music via Bluetooth
Description
Button
Auto Mode: Three automatic angles available
Lift Calf Rest: Press and hold this button to slowly lift the calf rest.
Release the button to stop
Lower Calf Rest: Press and hold this button to slowly lower the calf rest.
Release the button to stop
Lift Back Rest: Press and hold this button to slowly lift the back rest.
Release the button to stop
• Eligible smartphones or tablets can connect to the product's audio speakers and play
music by using Bluetooth. Please make sure the product is powered on and that no
other device is connected to the product's Bluetooth. When finished, disconnect from
the product's Bluetooth so that the next user can connect to it.
Installing the Arm Rests
• Starting at one side of the chair first, locate the 3 loose plugs (2 connectors and 1 air
pump) that are inside the chair at the bottom of the seat frame. (Figure 1)
• Bring the 3 plugs out and through the center of the square steel frame. These will be
connected to the plugs from the matching arm rest. (Figure 2)
Lower Back Rest: Press and hold this button to slowly lower the back
rest. Release the button to stop
End Massage and Set Memory Program
• Press the power button any time to stop all massage functions immediately. If the
timer runs out, all massage functions will stop but the back and foot rest will not
return to their original positions.
• After the timer runs out, the word "Memory" will blink on the display screen. This is a
reminder to store your customized massage settings by selecting M1 or M2.
• If you choose to skip this step, press the power button again within 10 seconds of
pressing it the first time for the back and foot rest to return to their original positions.
Please wait for all motions to stop before attempting to get out of the chair.
• If you choose to wait out the 10 seconds, the back and foot rest will not return to
their original positions and will stay in its reclined position.
• Press the power switch to OFF and unplug the power cord.
NOTE: Do not unplug the power cord if the power is still switched to ON.
Figure 1
Figure 2
• Carefully match up the 3 plugs from this side of the chair with the plugs from the
matching arm rest. Make sure everything is connected securely. (Figure 3)
• After connecting the 3 plugs, gently insert the connected plugs back into the inside of
the chair frame towards the bottom of the seat frame. Make sure the air pump is not
folded when performing this step. (Figure 4)
Insert into the bottom
of the seat frame
POWER INPUT
FUSE
ON/OFF
CONTROLLER JACK
Diagram of the power switch position (3rd figure) Unplug the power cord
12
Instruction Manual
Figure 3
Figure 4
Instruction Manual
13