Method of Usage
Screw the nails into the hole and tighten it (Figure 3).
Prepare the cylinder fixed pipe (Figure 4).
Insert the cylinder fixed pipe into the hole located on the right arm rest. Make sure
that the holes on the fixed pipe are aligned with the holes on the arm rest (Figure 5).
Screw 3 nails into the holes and tighten them (Figure 6).
Prepare the controller frame assembly (Figure 7).
Insert the controller frame assembly into the cylinder fixed pipe. Make sure that the
holes are aligned (Figure 8).
Method of Usage
Prepare 2 nails and insert them into the 2 holes (Figure 9).
Tightly screw the 2 nails, and installation is complete (Figure 10).
8. Controller Installation and Usage
Insert the frame into the fixed pipe (Figure 1). The frame can now turn fre [ H