International Dealer News IDN 139 October/November 2017 | Page 37

PRO GuIDe Hevik all-condition rainwear system Hevik’s top-of-the-range ‘Rainstop’, ‘Twister’ and ‘Dry Light’ rainsuits, high-visibility jacket and trouser options, plus shoe and glove covers completing the offer, provide dealers with a one-brand system of options that will keep their customers dry (and seen) in all conditions. Aimed at long distance riders, Hevik says ‘Rainstop’ can stand a pressure equal to an 8,000 mm water column even after many hours spent in the rain, maintaining high breathability thanks to the use of polyurethane coating (PVC-free ‘Ripstop’ Nylon). The jacket has an internal waterproof pocket, strap adjusters at the waist, a fold-away concealed hood and a strap central closure with double fastening and air vents on the back. The trousers have an elasticated waistband and strap adjusters at the bottom of the leg. Both garments have yellow fluorescent inserts to enhance active safety. The suit is sold in a compact waterproof bag that can be stored in a backpack or under the saddle. For commuters, the ‘Twister’ waterproof suit has features that “are above the average” for such a journeys in the rain. Hall 13 Made of Nylon PVC, EXHIBITOR O80 matched to a mesh lining, ‘Twister’ offers the same wear features as the ‘Rainstop’. ‘Dry Light’ is “ideal for urban use” and made from windpr oof and waterproof fabric (polyester with PVC coating on the outside with an internal lining). Its waterproof level (it can stand a pressure equal to a 3,000 mm water column) is enough to withstand rain during short urban trips. The jacket has a central zipper opening protected by a hook and loop fastening strap, a non-removable hood that folds into the collar and closure at the wrists with elastic and strap. Trousers have an elasticated waistband and strap regulation at the ankles. garment as it can stand a pressure equal to a 5,000 mm water column, and therefore provides the necessary water resistance during medium or longer HEVIK S.r.l. Brescia (BS), ITALY Tel: [phone] [email protected] www.hevik.com Upgraded ‘Featherlight’ replacement cables for R1 British motorcycle controls specialist Venhill Engineering has developed a range of smooth action replacement clutch cables for all generations of Yamaha’s YZF-R1. Designed and made in the UK, the light and durable cables feature a smaller conduit to reduce weight, increase flexibility when routing and provide an improved, smoother operation compared to the OE version, without compromising strength or performance. The cables feature the much-needed additional length to route around the R1’s starter motor, so that when at rest on full lock, there is no binding/pinching on the starter socket. Like all Venhill control cables, each one features high quality Featherlight cabling - marine-grade stainless steel inner wire for minimum stretch and a Teflon liner for minimum friction and a lighter action and removing the need for lubrication. Each cable is also ‘Bird-caged’ – a special process applied to the end of the inner cable wire, which allows solder to penetrate the weave of the cable, making the bond with the nipple much stronger and reducing the cable breakage that can arise when conventional designs are put under repeated stress and pressure. The new cables sit alongside Venhill’s ‘standard’ replacement cables for the R1, so dealers have a choice of staying with original spec or upgrading; available for all years of the YZF-R1 (1998-2017). VENHILL ENGINEERING Dorking, Surrey, UK Tel: [phone] [email protected] www.venhill.co.uk EXHIBITOR Hall 24 Q88