International Dealer News IDN 113 July 2013 | Page 22

PRODUCT NEWS Polini ECU and CDI for TMax POLINI Motori has created two new products for Yamaha’s maxi scooter – the TMax. The new ECU and CDI are additions to the range of items already available from the Italian scooter tuning specialist. The new ECU from Polini is being made available in two versions; one for the TMax 500, the other for the TMax 530. The company claims the ECU is the most advanced programmable unit available for the TMax, and it controls the amount of fuel that enters in the cylinder by changing the fuel injection. It uses the original sensor located in the air filter, and acquires data to set itself automatically according to the weather condition. For the best performance, Polini recommends its ECU is used with its spark advanced for scooters equipped with Hi-Speed variator, air filter, Polini ECU, racing muffler and increased compression ratio. Red creates spark advance for scooters equipped with Hi-Speed variator, air filter, Polini ECU and racing muffler. The Polini CDI is an additional control unit that intercepts the signal coming from the coil and modifies it by increasing or decreasing the spark advance value. Hi-Speed variator. The Polini CDI is set up with three advanced curves that cannot be modified. Green offers original spark advance. Yellow is for use in two conditions: spark advanced for scooters equipped with Hi-Speed variator, air filter, Polini ECU and original muffler, or POLINI MOTORI Alzano Lombardo (BG), ITALY Tel: [phone] [email protected] www.polini.com Fehling Type LZR bars X-Black Oval for Super Ténéré EXAN now has a version of its X-Black Oval exhaust available to fit the Yamaha XT 1200Z Super Ténéré. The latest Exan exhaust, which has an oval profile, has a stainless steel collector and the choice of three body materials; steel, stainless steel or titanium. All three options are finished in satin black and have a trapezoidal shape for the end cap. EXAN Lissone, ITALY Tel: [phone] [email protected] www.exan.it FEHLING has expanded its handlebar options with the introduction of two styles under the Type LZR name. The 22mm Low Z-Handlebar, 720mm wide and 210mm high, and the High Z-Handlebar, 720mm wide and 280mm high, are both available in a choice of black or silver and come complete with a TÜV technical report. ERNST FEHLING GMBH & CO. Telefon: [phone] Fax: [phone] [email protected] www.fehling.de 22 INTERNATIONAL DEALER NEWS - JULY 2013