Stub Augers
Shank Adaptors
Snappy drill adaptors can be fitted to any round
shank tool or accessory with a shank diameter
of 6mm. Consisting of a sprung steel collet and
lock nut, they simply tighten around the shank
using two spanners. The recommended
maximum tool or wheel diameter is 50mm.
SNAP/ADP/6MM (qty 5)____________£9.95
SNAP/ADP6/SET ________________£15.95
(qty 3 + SNAP/QC)
A shorter version of the
auger bit, stub augers
are used when cutting in
confined spaces such as
between joists or stud
framing. Available in 7
diameters from 8 to
25mm, these also have
spiral cut lead points
and single side spurs.
Prices start from £3.00
Wood Saws
New Snappy Wood Saw set
contains six sizes of carbon steel self-locking ring
blades. It provides an economical solution for drilling
large holes in natural timbers with one quick changing
tool. Hole sizes vary from 32mm to 64mm.
SNAP/WS1/SET __________________£9.95
Countersinks
Drill Bit Guides
Suitable for use on abrasive
materials,TCT countersinks are
used to drill a pilot hole and
countersink to ensure perfect
screw alignment. There are four
new metric diameters of 3,4,5 and
6mm in the TCT countersink range.
Prices start from £3.95
New to the Snappy range of drill guides is
a new size of 4.3mm diameter No. 12
screws. Drill bit guides are used to drill
pilot holes for fittings with countersunk
fixing holes. The retracting tube guides the
drill towards the centre of the hole for
accurate alignment of the screws in the
hinge or fitting. Prices start from £8.95
Tubular Plug Cutters
Designed for cutting extra long plugs, these high
quality tool steel tubular cutters cut clean precise
diameter parallel-sided plugs. Available in six
diameters of 8, 9.5, 10, 12, 12.7 and 16mm.
Prices start from £10.95
Wire Brushes
TCT Machine Bits
Wire brushes have a wide range of uses
including rust and paint removal, metal and wood
finishing and general surface preparation. The
brush types available in the Snappy range are a
50mm cup, 20mm end brush and a 50mm wheel.
Prices start from £3.00
Available in diameters of 26 and
35mm to suit standard
concealed cabinet hinge bosses,
these cutters are made of high
quality tool steel with tungsten
carbide tips. Designed to
produce clean precise diameter
blind recesses, they have a
centre lead in point for accurate
positioning. It is recommended
that these cutters are used in a
drill mounted in a drill stand.
SNAP/MB/26TC ________£8.50
SNAP/MB/35TC _______£10.50
Spring 2002
www.trendmachinery.co.uk/snappy