Rota Tip® Trimmers
Now available with a diameter of 19.1mm, this flush
trimming cutter is fitted with a shank mounted
bearing, secured by a collar and grub screw. Available
with a 1/2 inch shank, the overall cutting length of the
replaceable blade is 50mm.
RT/70 _____________£59.95
Rota Tip® Straight Cutters
Particularly suitable for cutting abrasive
materials such as chipboard and
laminate faced board, Rota-tip® cutters
are fitted with replaceable solid carbide
blades. Each blade have cutting edges
on two sides, allowing the blade to be
turned through 180° to double its
cutting life. The blades are retained by
Torx® headed screws, allowing the
blades to be replaced without altering
the router/machine settings. These
blades are ideally suited for all specialist
applications requiring minimal down
time and the economy of replaceable
tips.
Rota Tip® Rebater
With a diameter of 38.1mm and fitted with twin 12.7mm (1/2
inch) guide bearings, this cutter will produce a rebate width of
12.7mm. Alternative rebate widths can be achieved by fitting
different diameter bearing rings (available separately). This
cutter is available with a 1/2 inch diameter shank.
RT/39 _____________£69.95
Specialist Cutters
90° Trimmer
Several new cutters have been added to the range of
specialist cutters for routing plastics, aluminium, PVC and foil
faced materials. These include straight single flute cutters, an
upcut-downcut spiral for trimming foil faced materials up to
19mm thick and a single fluted spiral, pierce and trim cutter,
specifically suited to aluminium panel construction.
ACR2/80_________£25.00
ABSS2/61 _______£14.00
ACR3/81_________£25.00
ABS3/22 ________£15.00
S57/01___________£55.95
59/1 ___________£19.95
This extra long bearing-guided
trimming cutter has a cutting edge
length of 50mm. It is suitable for
trimming a wide range of materials
including plastic laminate faced
boards, plywood and medium density
fibreboard (MDF), as well as hard and
soft woods. Generally used for
trimming the workpiece flush to the
edge contour of a pre-cut template.
This cutter is available with a 1/2 inch
diameter shank.
46/212 __________£44.50
Double-Guided Trimmer
Double bearing-guided trimming
cutters allow the template to be
placed either above or below the
workpiece. This allows the timber to
be flipped over when necessary to
accommodate the grain pattern and
direction. With cutting edge lengths
of 25.4 and 50mm, both cutters are
available with 1/2 inch diameter
shanks.
46/300 _________£45.95
46/301 _________£49.95
All prices are exclusive of VAT
19