new cutters
New cutters for Trend ’ s Professional and Craft ranges
Craft Range Template Profilers
Two further bearing guided , straight fluted cutters are now available for trimming and template profiling . One has a 19.1mm diameter and 19mm cutting length , while the other has a 19.1mm diameter with a cutting length of 50mm . Both are supplied on a 1 / 2 inch shank . Both are two flute Tungsten Carbide Tipped cutters , the shorter one having a plunge cut facility in the form of a TCT tip brazed into the bottom of the cutter
( C165X1 / 2TC and C166X1 / 2TC ).
Craft Range 90 ° Designed for trimming intricate shapes and details , these cutters are ideal for signmaking , toymaking and dolls house construction . Both cutters have a diameter of 6.3mm and are available with cutting lengths of 12.7mm and 25.4mm . For use on laminates , veneers , fibre and particle board as well as natural timbers ( C167X1 / 4TC and C168X1 / 4TC ).
Craft Range Dovetail Cutters A range of two flute Tungsten Carbide Tipped cutters have been introduced for use with Elu , DeWalt , NuTool and Titan dovetail jigs . Four are mounted on 1 / 4 inch shanks for use with the appropriate guide bush , while the fifth cutter is fitted with a shank mounted bearing . The four unguided cutters have spurs ground on each tip to allow for the dispersal of excess glue when the joint is assembled ( C159X1 / 4TC - C163X1 / 4TC ).
Professional Range Guided V-Groove Panel Cutters
Two new bearing guided V-groove cutters have been added to the Trend Professional cutter range . One is a 60 ° x 12.7mm diameter cutter , mounted on a 1 / 4 inch shank . The other is a 45 ° x 19.1mm diameter on a 1 / 2 inch shank . Both cutters are two flute Tungsten Carbide Tipped with shank mounted guide bearings for use with internal or external templates ( 11 / 20X1 / 4TC and 11 / 41x1 / 2TC ).
INProfile
25