Special purpose
cutters and cutter
assemblies
Biscuit
Jointing
Cutter Set
(Trend ref 342)
The use of biscuit dowels made
of compressed timber, are regularly
used to form joints in both natural
timbers and man-made materials.
This method of jointing can easily
be carried out using the router
fitted with a suitable width
slotting cutter (4mm) and
arbor. Alternative diameter
bearings allow recesses of different
depths to be cut to suit the three
common biscuit sizes of 0 , 10
and 20. All three biscuits sizes
require a groove width of 4mm.
V-Joint Matchlining Cutters
(Trend ref 338 & 339)
Using a square tipped cutter to
produce the groove,
matchlining cutters
have a second
chamfered edge cutter
to cut the v-joint profile.
To cut both interlocking
profiles, the slotting cutter is
exchanged for one of a
different diameter and the
guide bearing is
re-positioned on the arbor.
Suitable for material between 10
to 17mm using a 4mm grooving
cutter and 15 to 23mm using a
6.3mm grooving cutter.
18
INProfile
Bearing Guided Tongue and
Groove Cutter Set
(Trend ref 337)
Consisting of two slotting cutters
(6.35mm and 10mm kerf), fitted on
either an 8mm or 1/2 inch arbor,
these cutters can be used to cut both
the tongue and groove profiles of the
joint on timber up to 22mm thick.
A 22mm diameter bearing is supplied
to produce a depth of cut of 9.5mm.
Quadriset Groover Set
(Trend ref QUADx1/2)
The Quad groover offers the
facility to cut infinitely variable
groove widths up to 18.35mm.
Consisting of a 12mm arbor
and four grooving cutters of
3.2, 4, 4.8 and 6.35mm
widths, it comes complete
with a 22mm diameter
guide bearing
and a set of
nine shims.
Finger Joint Cutter Set
(Trend ref 866)
This cutter is used for joining timber
either end to end or edge to edge,
leaving both faces absolutely flush.
The set consists of five tapered tooth
slotting cutters, allowing timber
up to 36mm to be jointed.
These cutters are mounted
on a 1/2 inch shank arbor
along with a tapered
tooth butting
cutter and a
28mm
guide
bearing.
Comb Joint Cutter Set
(Trend ref 876)
Ideal for small box work, the set
comprises five square tooth slotting
cutters mounted on a 1/2 inch shank
arbor with shims and spacers. Three
guide bearings are supplied with 28, 29
and 34mm diameters. This cutter
should only be used in a table
mounted router and is
suitable for timber
widths up to
40mm. IP