Routing operations
on the CRT MK2
Edge Planing
When edge planing, the planing fence is
adjusted proud of the out-feed fence face.
As a general guide, the maximum depth of
cut when planing should not exceed 2mm.
Rebating
!
Rebates can be cut against
the backfence using a
straight two flute cutter.
Safety First
Always use a
pushstick, keeping
your fingers well
clear of the cutter.
Never allow your
fingers to be in
contact with the part
of the workpiece that
is passing over the
cutter, (guard
retracted for clarity).
Moulding
Decorative moulding operations
using all styles and sizes of cutters
can be carried out on the CRT MK2.
When moulding panel edges, cutting
tenons or carrying out other
operations with the timber held
vertically against the backfence, the
optional vertical routing support
prevents the bottom of the
workpiece moving away
from the fence and
provides better
guarding of the
exposed cutter.
Grooving
Grooves cut on the face of the workpiece
can be routed with extra safety by using the
flip over cutter guard. After setting up
the cutter and checking that the
guard lifts freely, the work is fed
across the cutter, held tight against
both the table and the in and out feed faces
of the back fence. Once the workpiece has
cleared the cutter the guard drops back to
cover it.
Autumn 1999