new
cutters
Cutter Set SS7
Developed from the highly successful SS3 set, this affordable set contains
six popular 1/4” shank cutters, comprising a 6mm and 12mm straight
two flute, a 90° v-groove, two ball-bearing guided ovolo round overs,
(R6.35mm and R9.5mm) and one bearing guided ogee cutter.
Octacut® Eight in One Set
Dished Mould Radius
These new sets have been
designed to cut eight different
profiles: four ovolo, two
rounding overs, one cove
mould and one rule joint.
Three sizes are offered with
radii of 6.3mm (25/3x8mmTC),
9.5mm (25/5x8mmTC) and
12.7mm (25/7x1/2TC).
The 18/15x1/4TC dished mould
is an ideal panelling cutter for
kitchen or cabinet doors, and
for ribbon twist on the
router lathe. It has a
radius of
26mm and a
diameter of
32mm.
Ovolo Panel Moulder
A new size introduced to complete
the range of ovolo cutters. The
7/10x1/4TC can be used for panel
cutting of drawer fronts as well as
edging window frames, glazing bars,
cabinets, table-tops, shelves and fire
surrounds. It has a radius of 4mm
with a diameter of 19mm.
Straight Two Flute
90° Guided Trimmer
With a 9.5mm diameter and a 25mm
cut length, the 90° Trimmer
T46/02x1/4TC is a useful size
trimming cutter for laminate and
template trimming operations.
The C153x1/2TC is a new long
reach 1/2” diameter straight
cutter added to the Craft
Range. It has a cut length
of 50mm and can be used
with Trend’s Postform
Worktop Jigs to cut,
butt and scribe joints.
Panel & Veining
A range of three 1/4” shank small sized
panelling cutters which are also ideal
for veining and fluting applications.
They are ideal for use with the
Routerlathe. The 16/2 has a radius of
4.8mm and the 16/3 and 16/4 have a
radius of 6mm and 7.5mm respectively.
Easyset ® - Profile Scribers
These Profile Scribers use the same components
as our standard PSC sets. Both parts of the joint
are cut by only changing the cutter height with no
re-assembly of parts required.
The three 1/2” shank styles offered are ogee (PSC/101), flat classic - (PSC/103) and bevel (PSC/105). The ogee set is also available in the
craft range with an 8mm shank (C155).