new cutters
Staff Beads
Template Profilers
Ideal for creating bullnose and
half round mouldings on window
boards, panels and table-tops.
These TCT cutters are for
cutting bead radii of 6, 8 and
10mm.
9/2x1/2TC (rad. 6mm)£42.95
9/3x1/2TC (rad. 8mm)£47.60
9/4x1/2TC (rad. 10mm)£49.25
Heavy Duty Ovolos
Heavy Duty Ogees
Three TCT ogee cutters that are
suitable for use on heavy duty
routerlathes. They are ideal for
fluting spindles and other decorative
turned work as well as for ogee
moulding. The 22/7x1/2TC cutter
will also give an astragal mould effect.
22/08x1/2TC
(rad. 19mm x 41.5mm dia.) £69.75
Latest additions to the
Trend cutter range
Three ovolo cutters ideal for
fluting spindles and other
decorative turned work. These
ovolos have a small flat ground
on the nose that produces a
very fine cut, suitable for routing
false panel mouldings and engraving
work.
The 16/8X1/2TC cutter has a
double ovolo mould effect.
Three new template profiling
cutters, with shank mounted
bearing guides, have been added
to the range. The TCT two flute
cutters are suitable for portable and
table routing. The ball bearing guide
is slightly larger in diameter than the
cutter to minimise scoring.
46/96x1/4TC
(12.7mm dia. x 32mm cut) £22.50
46/100x1/2TC
(25mm dia. x 25mm cut)
£36.50
46/101x1/2TC
(25.4mm dia. x 45mm cut) £39.95
Straights - two & single flute
Two flute TCT straights for a clean
finish and better quality of cut.
16/5x1/2TC
(rad. 18mm x 44mm dia.) £71.95
3/41x1/4TC
(8mm dia. x 25mm cut)
£17.50
16/6x1/2 TC
(rad. 25mm x 41.5mm dia.) £71.95
3/41x1/2TC
(8mm dia. x 25mm cut)
£17.95
16/8x1/2 TC
(rad. 6mm and 15mm)
3/81x1/4TC
(12.7mm dia. x 32mm cut) £19.95
£74.95
22/7x1/2TC
(rad. 22mm x 40mm dia.)
£69.95
4/03x1/2TC
(14mm dia. x 50mm cut)
22/10x1/2TC
(rad. 30mm x 50mm dia.)
£72.50
Single flute straight for fast cutting
2/63x1/4TC
(7.9mm dia. x 25mm cut)
2/63x1/2TC
(7.9mm dia. x 25mm cut)
£35.95
£18.25
£18.25
Stepped Rebate
Hinge Sinking Bits
Two new machine bits are now
included in the range designed to drill
the hinge recess for
concealed cabinet hinges.
With diameters of 20mm
and 25mm each cutter is
mounted on a 8mm shank.
TCT Machine Bit
A 17mm TCT machine bit has been
added to complete the Trend range.
Sizes now range from 10mm to
36mm in increments of 1mm.
1004/17TC
£33.62
T420/20x8mmTC £7.85
T420/25x8mmTC £7.95
This 1/2” diameter shank TCT
stepped rebate cutter is ideal for
recessing shelving strip and other
fittings.
36/2x1/2TC
(14mm dia. x 8mm cut)
£39.95
Panel Mould
This 1/2” shank version of Trend’s
popular TCT ogee panel mould cutter
has an increased shank length making
it ideal for creating panel mould
effects on kitchen unit doors. It is
particularly suitable for routing a
wide mould in thin material.
18/01x1/2TC
(3.2mm rad. x 25mm dia.)
£40.23
All prices exclude VAT
Winter 1997
INProfile
21