Ingenieur Vol.82 April-June2020 | Page 61

(Source: Climate Change Performance Index (CCPI), 2019.) Figure 4: Overall results of the Climate Change Performance Index 2019 level of ‘unknown’ problems due to dealing with an existing building that will only become apparent during construction work and sometimes needs some extra back up planning. Furthermore, refurbishment needs some extra planning due to the generation of much higher value waste and in larger volumes (furniture, architectural salvage, etc.); a lot more mixed waste; complicated materials that may have some contamination with hazardous waste. Refurbishment and Environmental Issues In Malaysia, the open dumping of waste is seen as the simplest and most efficient way of handling refurbishment waste. However, it has many adverse environmental, social and economic impacts. Only some of the projects conduct scrap sorting into recycle bins. The fee charged for waste disposal or dumping on average is about RM450 (~USD125) per truckload. In the local construction industry, the sub-contractor is responsible for managing and transfering waste to a landfill. Generally, the waste disposal sub-contractor collects the waste bin at the project site and then transports it either to an illegal dumpsite or landfill. However, some reusable items such as plywood, timber, and paper, with values of approximately at RM500 - RM1000 (USD138-USD278) per ton can be sold to a recycling company. The environmental impact of these activities needs urgent attention, however for action to be taken, as a minmum there is a need to quantify and evaluate the waste generated from these construction activities. Studies conducted by Masudi et al., (2011) in quantification and assessment of the waste during the valuation of a new construction building in the Klang Valley, showed that the waste index (debris) generated from new construction projects is in the range of 0.03-0.5(m 3 /m 2 ). This is attributed to many factors such as type of building, size of gross floor area, type of construction methods used and waste management by contractors. Meanwhile, other than the waste issues, building construction has a significant impact on the environment, especially in producing a large amounts of carbon dioxide. Referring to the Climate Change Performance Index (CCPI), 2019, Malaysia is grouped in the red colour category and classified as “very poor condition”. It is among the lowest countries in controlling CO 2 emission with ranking 51 out of 60 countries as shown in Figure 4. 59