Ingenieur Vol.79 July-Sept 2019 ingenieur 2019 july-sept | Page 44

INGENIEUR Figure 4: Individual Lockable Storage Facilities ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 6 42 Adequate security should be provided to protect workers and their belongings, e.g. perimeter fencing and patrols when unoccupied. Lockable storage facilities should be provided to secure personal belongings as shown in Figure 4. Recreation/ living areas should be provided, e.g. TV and sports equipment. Facilities should be ventilated naturally or mechanically to a reasonable level of comfort. There should be maximum six workers with a total area of 3m2 per worker, reviewed in compliance with the Malaysian Standard MS 2593:2015. The bedding that is provided should be clean and appropriate. Where beds are provided, they should be spaced apart, raised off the floor and with safe access provided. Other forms of bedding, such as roll out mattresses, are acceptable where industry norms dictate; however, other forms should only be implemented if they meet the basic principles. Linen, if provided, should be cleaned on a regular basis. Triple-deck bunks should not be utilised due to the risk of falls. VOL VOL 79 55 JULY-SEPTEMBER JUNE 2013 2019 Figure 5: Refuse Bins located throughout the Block