TRAINING & SIMULATORS
are increasingly driven by software, and that shift is delivering real gains in safety, productivity and efficiency. It also creates a new operational reality: fewer operators now carry greater responsibility for the performance of increasingly complex, costly and operationally sensitive systems. Where many operators once controlled one machine each, a single operator may now supervise several semi-autonomous or autonomous machines at once, and the output of an entire operation can rest on a handful of highly skilled people. As automation increases, so does the criticality of human performance.”
Operators of remotely controlled underground loaders, for example, are often responsible for up to four machines at once, so the impact of any mistake is multiplied four times over. Shovel and excavator operators on autonomous haulage sites carry similar responsibility: poorly placed loading zones, reverse points, queue points and exit points for autonomous trucks cause congestion and constant interventions, slowing the entire production cycle.
ThoroughTec:“ Technology alone does not make an autonomous mine work. Introducing autonomous haulage is as much a change management exercise as an engineering one: everyone who works around the system, from excavator operators to pit technicians and supervisors, must understand it, trust it and know their role within it. Simulator training is ideally suited to that challenge.”
The traditional machine operator is becoming a system manager and automation supervisor. Beyond levers and pedals, today’ s operators must configure the software that governs automated equipment, monitor or control several machines at once, interpret digital feedback and system data, manage exceptions and intervene when necessary, and optimise the interaction between manual and autonomous equipment.
They still need to know how to perform the task manually. But they must also manage automated systems, detect problems early and step in effectively when the system cannot. The result is a new kind of operator: highly trained, digitally skilled and accountable for complex automated systems.
Hands-on training on these systems is hard to come by. Live training can demand dedicated infrastructure, specialised equipment and operational downtime, and because the return on investment in automation depends on maximum uptime and minimal disruption, sites have little room for it. The answer is virtual training.
ThoroughTec’ s CYBERMINE simulators have modelled AI-controlled equipment and systems inside the simulated mine for decades, which it says makes them well suited to training for autonomy. Instead of tying up expensive production equipment, operators train in a high-fidelity virtual environment that replicates the machines, their control systems and site conditions.
Training takes place without removing equipment from service, without operational risk and without production downtime. Operators can rehearse complex autonomous workflows, and the faults and exceptions that come with them, long before they meet them in the field.
CYBERMINE simulators now cover the full spectrum of modern operations: semiautonomous equipment, remote and nonline-of-sight operation, autonomous haulage, in-cab control systems for dig units and support vehicles, and command-and-control environments.
ThoroughTec has simulated Epiroc’ s LinkOA Autonomous Haulage System across three machines for a large Australian iron ore mine: the Hitachi EH4000AC-3 haul truck, the Hitachi EX3600-7 excavator and a Toyota Hilux support vehicle. Operators can learn to use the LinkOA In-Cab Client correctly before they set foot in a live vehicle.
On the excavator, operators load manually while coordinating the autonomous trucks in their loading zone, making sure trucks queue, spot and exit safely and efficiently. In the support vehicle, pit technicians practice supervising the autonomous fleet: optimising routes, remapping boundaries, creating lockout zones and resolving operational exceptions, all without disrupting production.
For Caterpillar sites, the Cat 6060 shovel simulator now in development with Caterpillar embeds MineStar Terrain for Loading. Shovel operators will learn to dig to plan while working alongside autonomous Cat haul trucks, building familiarity and confidence from their first shift.
The Cat Remote Operator Station simulator trains operators to supervise and control several semi-autonomous R1700K loaders exactly as they would in the real world. Operators switch between co-pilot, autopilot and tele-remote modes to handle manual load and dump tasks.
Training covers manual operation, equipment monitoring, exception handling, response to equipment faults and holding production targets. In remote loader applications, one operator may choreograph several machines at once, a task that demands exceptional situational awareness and is only mastered through structured repetition.
ThoroughTec has also simulated several of Sandvik’ s iSeries drill rigs, including the DD422i, DL422i, DU412i and DI650i. These incorporate automation features such as
AutoDrill, AutoMast, AutoLevel and drill bit navigation. Operators learn to configure and use these systems to minimise hole deviation, avoid jammed bits and extend tool life.
Over the past two years, demand for ThoroughTec’ s managed services has grown considerably. Customers increasingly want more than a simulator: they want an endto-end training solution. ThoroughTec has now deployed managed services at sites in Australia, Chile, Mali and South Africa.
For many operations, implementing a fully integrated training system can be a daunting prospect. ThoroughTec’ s managed services team offers initial, periodic or ongoing support to ensure the technology is correctly integrated, aligned with site processes and delivering effective training. Services scale from‘ Train the Trainer’ instructor development and certified engineer training through to full-time embedded simulator training facilitators.
For sites introducing autonomy, that continuity matters: the change management challenge does not end at commissioning, and embedded support helps keep every crew aligned as systems and fleets evolve.
Normet and Minera Meridian-El Peñón advance inclusion
Normet, the global technology company delivering innovative solutions for underground mining and tunnelling, recently partnered with Minera Meridian-El Peñón to deliver a dedicated all female sprayed concrete operator training program at the El Peñón mine in Chile. The initiative supported skills development, operational safety, and inclusion, while creating new opportunities for women in underground mining.
The Normet Academy training program combined classroom based theory, extensive VR simulator practices, and real world field experience. Participants received instruction in safety procedures, sprayed concrete fundamentals, equipment systems, SmartScan technology, concrete additives, and applicable industry standards. This was complemented by immersive VR simulator training covering pedagogical operational scenarios, allowing participants to build skills and confidence in a controlled environment before entering the mine.
Field training at El Peñón included equipment familiarisation, terrain and ground condition assessment, and supervised sprayed concrete operations underground, ensuring participants gained practical, job ready experience aligned with operational and safety requirements. After successfully completing the training, the participants are now ready to start their careers in mining.
Minera Meridian-El Peñón views the initiative as a concrete step toward increasing female participation in operational
50 International Mining | NOVEMBER / DECEMBER 2026